PARKER Plug: Solid Hex Drive Plug, Carbon Steel, 1/2 in, NPT Threaded
The PARKER Solid Hex Drive Plug (MPN 8 PH-S) is a threaded instrumentation extreme-pressure pipe fitting made from carbon steel with a 1/2 in NPT connection and a maximum operating pressure of 7,000 psi. 3G Electric…
SKU 3G-OTH-474706
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Solid Hex Drive Plug (MPN 8 PH-S) is a threaded instrumentation extreme-pressure pipe fitting made from carbon steel with a 1/2 in NPT connection and a maximum operating pressure of 7,000 psi. 3G Electric interprets your demand for this genuine PARKER component, sourcing it across 14 industrial departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Solid Hex Drive Plug used for?
The PARKER Solid Hex Drive Plug (MPN 8 PH-S) is a threaded instrumentation extreme-pressure pipe fitting used to seal or close off ports in high-pressure hydraulic and pneumatic systems. It is commonly applied in industrial fluid power, oil and gas, and process control systems requiring reliable sealing up to 7,000 psi.
What are the specifications of the PARKER 8 PH-S plug?
The PARKER 8 PH-S is a carbon steel solid hex drive plug with a 1/2 in NPT thread and a maximum operating pressure of 7,000 psi. It is designed for extreme-pressure instrumentation applications. 3G Electric sources this genuine PARKER component across 14 industrial departments, with specialist depth in combustion, pumps and controls.
Where to buy the PARKER 8 PH-S plug worldwide?
3G Electric supplies the genuine PARKER 8 PH-S solid hex drive plug to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we interpret your demand and source this component across 14 departments, including specialist expertise in combustion, pumps and controls.
How to install a PARKER solid hex drive plug?
Install the PARKER solid hex drive plug by applying a compatible thread sealant to the NPT threads, then hand-tighten into the port. Use a hex key to torque to the manufacturer's recommended specification—typically 15–20 ft-lb for 1/2 in NPT carbon steel fittings. Avoid over-tightening to prevent thread damage or leakage.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER threaded instrumentation extreme-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
