PARKER Compression Tee Fitting: 1/2 in OD x 1/2 in OD x 1/2 in OD Size, Brass
The PARKER Compression Tee Fitting (MPN 8-8-8 JBZ-B) is a single-ferrule brass compression fitting in the CPI™ series, sized 1/2 in OD x 1/2 in OD x 1/2 in OD with a 3/4" thread. 3G Electric interprets your demand…
SKU 3G-OTH-598440
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 8-8-8 JBZ-B) is a single-ferrule brass compression fitting in the CPI™ series, sized 1/2 in OD x 1/2 in OD x 1/2 in OD with a 3/4" thread. 3G Electric interprets your demand for this OEM-specified component, sourcing it across 14 industrial departments — with specialist depth in combustion, pumps and controls — to deliver the right answer, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER Compression Tee Fitting used for?
This PARKER CPI™ single-ferrule brass compression tee fitting connects three 1/2 in OD tubes in instrumentation, hydraulic, and pneumatic systems. It provides leak-free sealing in chemical, oil and gas, and industrial process lines where reliable fluid or gas handling is critical.
What are the specifications of the PARKER 8-8-8 JBZ-B fitting?
The PARKER 8-8-8 JBZ-B is a brass compression tee fitting with 1/2 in OD x 1/2 in OD x 1/2 in OD size and a 3/4" thread. It is part of the CPI™ series, designed for single-ferrule connections in high-pressure tubing systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings worldwide. We interpret your demand, source the correct OEM part, and handle logistics and customs for delivery to your site. Contact us for availability and lead time on the 8-8-8 JBZ-B or other CPI™ series fittings.
How to install a single-ferrule compression tee fitting?
Cut tubing square, deburr, and slide the nut and ferrule onto the tube. Insert the tube into the fitting body until it seats. Tighten the nut by hand, then use a wrench for the recommended turns per PARKER guidelines. Over-tightening can damage the ferrule seal.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER single-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
