PARKER Compression Tee Fitting: 1/8 in OD x 1/8 in OD x 1/8 in OD Fitting Size, Brass
PARKER Compression Tee Fitting, a standard sleeve brass compression fitting, is supplied in a 10-pack (MPN 164C-2). It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD fitting sizes, providing a reliable connection…
SKU 3G-OTH-482205
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
PARKER Compression Tee Fitting, a standard sleeve brass compression fitting, is supplied in a 10-pack (MPN 164C-2). It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD fitting sizes, providing a reliable connection point in tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting creates a leak-resistant branch connection in low-pressure tubing systems. It joins three 1/8 in OD tubes, commonly used in instrumentation, pneumatic controls, and fluid-handling circuits where a reliable brass fitting is required.
What are the specifications of the PARKER 164C-2 compression tee?
The PARKER 164C-2 is a standard sleeve brass compression tee fitting. It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD tubing and is supplied in a 10-pack. The brass construction resists corrosion and provides a secure seal in low-pressure applications.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 164C-2 10-pack. We source genuine industrial components across 14 departments.
How to install a PARKER brass compression tee fitting?
Cut tubing square, deburr, and slide the nut and sleeve onto the tube. Insert the tube fully into the PARKER tee body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid overtightening to prevent sleeve deformation. Always check for leaks after pressurization.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
