PARKER Compression Tee Fitting: 3/16 in OD x 1/8 in Pipe x 3/16 in OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 172C-3-2) is a standard sleeve brass compression fitting, supplied in a 10-pack. It accommodates 3/16 in OD tube on two ports and a 1/8 in pipe connection on the third…
SKU 3G-OTH-482081
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 172C-3-2) is a standard sleeve brass compression fitting, supplied in a 10-pack. It accommodates 3/16 in OD tube on two ports and a 1/8 in pipe connection on the third, enabling branch-line takeoffs in low-pressure fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting creates a branch-line takeoff in low-pressure fluid systems. It connects two 3/16 in OD tubes and one 1/8 in pipe, making it ideal for instrumentation, pneumatic, or hydraulic applications where a reliable, leak-resistant joint is needed.
What are the specifications of the PARKER 172C-3-2 compression tee?
The PARKER 172C-3-2 is a standard sleeve brass compression tee fitting supplied in a 10-pack. It has two ports for 3/16 in OD tube and one port for 1/8 in pipe. The brass construction provides corrosion resistance for low-pressure fluid systems.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER parts like the 172C-3-2 and support procurement across 14 industrial departments.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee, slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid overtightening to prevent tube deformation. Always verify tube OD and pipe thread compatibility before assembly.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
