PARKER Compression Tee Fitting: 5/16 in OD x 5/16 in OD x 5/16 in OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 164P-5) is a creep-resistant, self-aligning brass compression fitting with a 5/16 in OD x 5/16 in OD x 5/16 in OD fitting size, supplied in a 10-pack. This OEM component is…
SKU 3G-OTH-596254
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 164P-5) is a creep-resistant, self-aligning brass compression fitting with a 5/16 in OD x 5/16 in OD x 5/16 in OD fitting size, supplied in a 10-pack. This OEM component is designed for reliable tube connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubes of equal outside diameter in industrial fluid systems. It is used to branch or combine flow in pneumatic, hydraulic, and instrumentation lines. The creep-resistant, self-aligning brass design ensures reliable, leak-free connections under vibration and thermal cycling.
What are the specifications of the PARKER 164P-5 compression tee fitting?
The PARKER 164P-5 is a brass compression tee fitting with a 5/16 in OD x 5/16 in OD x 5/16 in OD fitting size, supplied in a 10-pack. It is creep-resistant and self-aligning, designed for OEM-grade tube connections in industrial fluid systems. The manufacturer part number is 164P-5.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the PARKER 164P-5 or other compression fittings for your fluid system needs.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee fitting, cut the tube squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid over-tightening to prevent damage.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER creep-resistant self-aligning brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
