PARKER Compression Fitting Adapter: 1/8 in OD x 1/4 in Pipe Fitting Size
The PARKER Compression Fitting Adapter (MPN 2FSC4N-316) is a double-ferrule stainless steel fitting with a 1/8 in OD x 1/4 in Pipe Fitting Size, configured as Compression x FNPT. It is compatible with Parker A-LOK…
SKU 3G-OTH-471208
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Adapter (MPN 2FSC4N-316) is a double-ferrule stainless steel fitting with a 1/8 in OD x 1/4 in Pipe Fitting Size, configured as Compression x FNPT. It is compatible with Parker A-LOK fitting brands, providing a reliable connection for industrial tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER 2FSC4N-316 compression fitting adapter used for?
The PARKER 2FSC4N-316 is a double-ferrule stainless steel adapter used to connect 1/8 in OD tubing to a 1/4 in FNPT threaded port. It provides a leak-tight, vibration-resistant seal in industrial fluid and gas systems, such as instrumentation, hydraulic, and pneumatic lines.
What are the specifications of the PARKER 2FSC4N-316?
The PARKER 2FSC4N-316 is a compression x FNPT adapter with 1/8 in OD tube size and 1/4 in pipe fitting size. It is made of stainless steel with a double-ferrule design and is compatible with Parker A-LOK fitting brands. The manufacturer part number is 2FSC4N-316.
Where to buy the PARKER 2FSC4N-316 worldwide?
3G Electric supplies the PARKER 2FSC4N-316 compression fitting adapter to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this genuine PARKER part.
How to install a PARKER double-ferrule compression fitting?
To install a PARKER double-ferrule fitting like the 2FSC4N-316, insert the tube fully into the fitting until it bottoms out, then hand-tighten the nut. Mark the nut position, then tighten with a wrench to the manufacturer’s recommended turns (typically 1-1/4 turns). Always use proper tube support and avoid over-tightening.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
