PARKER Compression Fitting Elbow: 1/4 in OD x 1/4 in Pipe Fitting Size
The PARKER Compression Fitting Elbow is a double-ferrule stainless steel fitting with a 1/4 in OD x 1/4 in Pipe Fitting Size and Compression x ORB type (MPN 4M5SEL4-316). It is compatible with Parker A-LOK fitting…
SKU 3G-OTH-471976
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow is a double-ferrule stainless steel fitting with a 1/4 in OD x 1/4 in Pipe Fitting Size and Compression x ORB type (MPN 4M5SEL4-316). It is compatible with Parker A-LOK fitting brands, providing a reliable connection for industrial tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Fitting Elbow 4M5SEL4-316 used for?
This double-ferrule stainless steel elbow connects 1/4 in OD tubing to a 1/4 in pipe port via Compression x ORB ends. It is used in industrial fluid and gas systems where a leak-tight, vibration-resistant joint is required, such as in instrumentation, hydraulic, and pneumatic circuits.
What are the specifications of the PARKER 4M5SEL4-316 fitting?
The PARKER 4M5SEL4-316 is a double-ferrule stainless steel compression elbow. It has a 1/4 in OD tube size and a 1/4 in pipe fitting size, with Compression x ORB connection type. It is compatible with Parker A-LOK fitting brands and carries MPN 4M5SEL4-316.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies and delivers the PARKER 4M5SEL4-316 compression elbow to worldwide locations. As a global industrial sourcing partner, we handle full logistics and customs clearance so you receive genuine Parker A-LOK-compatible fittings for your application.
How to install a double-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut finger-tight, then use a wrench to turn the nut 1-1/4 turns past hand-tight for 1/4 in tubing. This swages both ferrules onto the tube, creating a metal-to-metal seal. Do not over-tighten.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
