PARKER Compression Fitting Adapter: 1/4 in OD x 1/2 in Pipe Fitting Size
The PARKER Compression Fitting Adapter (MPN 4MA8N-316) is a double-ferrule stainless steel fitting with a 1/4 in OD x 1/2 in Pipe Fitting Size, configured as Compression x MNPT. It is compatible with Parker A-LOK…
SKU 3G-OTH-471807
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Adapter (MPN 4MA8N-316) is a double-ferrule stainless steel fitting with a 1/4 in OD x 1/2 in Pipe Fitting Size, configured as Compression x MNPT. It is compatible with Parker A-LOK fittings, providing a reliable connection for industrial tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER 4MA8N-316 compression fitting adapter used for?
The PARKER 4MA8N-316 adapter connects 1/4 in OD tubing to a 1/2 in male NPT threaded port. It is used in industrial fluid and gas systems where a leak-tight, vibration-resistant joint is required, such as in instrumentation, hydraulic, and pneumatic circuits.
What are the specifications of the PARKER 4MA8N-316?
The PARKER 4MA8N-316 is a double-ferrule stainless steel compression fitting adapter. It has a 1/4 in OD tube size and a 1/2 in male NPT pipe thread. It is compatible with Parker A-LOK fittings and is manufactured by PARKER under MPN 4MA8N-316.
Where to buy the PARKER 4MA8N-316 worldwide?
3G Electric supplies the PARKER 4MA8N-316 compression fitting adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this double-ferrule stainless steel fitting.
How to install a PARKER double-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms on the shoulder. Hand-tighten the nut, then use a wrench to tighten 1-1/4 turns for 1/4 in OD tubing. This swages the front ferrule onto the tube and seals the joint. Do not overtighten.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
