PARKER Compression Fitting Adapter: 3/8 in OD x 1/4 in Pipe Size, Compression x FNPT
The PARKER Compression Fitting Adapter (MPN 6-4 GH2BZ-B) is a single-ferrule brass compression fitting, type Compression x FNPT, from the CPI™ series. It connects 3/8 in OD tubing to a 1/4 in pipe size. 3G Electric…
SKU 3G-OTH-598443
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Adapter (MPN 6-4 GH2BZ-B) is a single-ferrule brass compression fitting, type Compression x FNPT, from the CPI™ series. It connects 3/8 in OD tubing to a 1/4 in pipe size. 3G Electric interprets your demand for this genuine industrial component, sourcing it across our 14 departments and backing it with specialist expertise in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER 6-4 GH2BZ-B compression fitting adapter used for?
The PARKER 6-4 GH2BZ-B is a single-ferrule brass compression fitting adapter used to connect 3/8 in OD tubing to a 1/4 in FNPT pipe port. It is commonly applied in instrumentation, pneumatic, and hydraulic systems where a leak-tight, metal-to-metal seal is required.
What are the specifications of the PARKER 6-4 GH2BZ-B?
The PARKER 6-4 GH2BZ-B is a Compression x FNPT adapter from the CPI™ series. It is made of brass, has a 3/8 in OD tube size and a 1/4 in pipe size. The single-ferrule design provides reliable sealing in high-pressure fluid systems.
Where to buy the PARKER 6-4 GH2BZ-B worldwide?
3G Electric supplies the genuine PARKER 6-4 GH2BZ-B compression fitting adapter worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this CPI™ series component.
How to install a PARKER single-ferrule compression fitting?
To install a PARKER CPI™ single-ferrule fitting, insert the tube fully into the fitting until it bottoms out. Tighten the nut finger-tight, then use a wrench to tighten an additional 1 1/4 turns for 3/8 in OD tubing. Always follow the manufacturer's torque specifications for leak-free performance.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER single-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









