PARKER Barbed Fitting Elbow: 11/64 in ID x 11/64 in ID Size, Barbed x MNPT, Brass
The PARKER Barbed Fitting Elbow (MPN 229-4-1) is a standard brass barbed tube fitting with a barbed x MNPT connection type, rigid construction, and 11/64 in ID x 11/64 in ID size. This component is part of our…
SKU 3G-OTH-476393
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Barbed Fitting Elbow (MPN 229-4-1) is a standard brass barbed tube fitting with a barbed x MNPT connection type, rigid construction, and 11/64 in ID x 11/64 in ID size. This component is part of our broader industrial supply across 14 departments, with specialist depth in fluid controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Barbed Fitting Elbow 229-4-1 used for?
The PARKER Barbed Fitting Elbow 229-4-1 connects flexible tubing to male NPT threads in pneumatic or low-pressure fluid systems. Its rigid brass construction and barbed x MNPT design provide a secure, leak-resistant joint in industrial equipment, instrumentation, and control panels.
What are the specifications of the PARKER 229-4-1 barbed fitting?
The PARKER 229-4-1 is a standard brass barbed tube fitting elbow with barbed x MNPT connection, rigid construction, and 11/64 in ID x 11/64 in ID size. It is manufactured by PARKER under MPN 229-4-1 and is suitable for low-pressure fluid and pneumatic applications.
Where to buy PARKER 229-4-1 barbed fittings worldwide?
3G Electric supplies the PARKER 229-4-1 barbed fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this genuine PARKER component for your fluid control system.
How to install a PARKER barbed fitting elbow?
To install the PARKER 229-4-1, cut tubing squarely, push it fully onto the barb until seated, and tighten the male NPT thread into the port using a wrench on the fitting hex. Avoid over-tightening brass threads. For rigid connections, ensure tubing is supported to prevent stress on the barb.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
