PARKER Compression Fitting Elbow: 5/8 in OD x 1/2 in Pipe Size, Compression x FNPTF
The PARKER Compression Fitting Elbow (MPN N10FE8) is a general-purpose nylon compression fitting with a 5/8 in OD x 1/2 in Pipe Size, configured as Compression x FNPTF. This PARKER component is designed for reliable…
SKU 3G-OTH-475963
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN N10FE8) is a general-purpose nylon compression fitting with a 5/8 in OD x 1/2 in Pipe Size, configured as Compression x FNPTF. This PARKER component is designed for reliable connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER N10FE8 compression fitting elbow used for?
The PARKER N10FE8 is a general-purpose nylon compression fitting elbow used to connect 5/8 in OD tubing to a 1/2 in FNPTF threaded port in industrial fluid systems. It provides a reliable, leak-resistant joint in pneumatic, lubrication, and low-pressure hydraulic applications.
What are the specifications of the PARKER N10FE8 compression fitting?
The PARKER N10FE8 is a Compression x FNPTF elbow made of nylon. It connects 5/8 in OD tubing to a 1/2 in pipe size female thread. The manufacturer part number is N10FE8. This fitting is designed for general-purpose industrial fluid handling where corrosion resistance and light weight are needed.
Where to buy PARKER N10FE8 compression fittings worldwide?
3G Electric supplies the PARKER N10FE8 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this nylon compression x FNPTF fitting for your industrial fluid system.
How to install a PARKER nylon compression fitting elbow?
To install the PARKER N10FE8, cut tubing square, deburr, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten, as nylon fittings can crack. Always follow manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
