PARKER Compression Tee Fitting: 1/4 in OD x 1/4 in OD x 1/4 in Pipe Size
The PARKER Compression Tee Fitting (MPN N4MT4) is a general-purpose nylon compression fitting with 1/4 in OD x 1/4 in OD x 1/4 in pipe size connections. This PARKER-branded fitting is designed for reliable…
SKU 3G-OTH-475882
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN N4MT4) is a general-purpose nylon compression fitting with 1/4 in OD x 1/4 in OD x 1/4 in pipe size connections. This PARKER-branded fitting is designed for reliable tube-to-pipe connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (N4MT4) is used to create a branch connection in nylon tubing systems, joining two 1/4 in OD tubes and one 1/4 in pipe thread. It is suitable for general-purpose industrial fluid handling, pneumatic controls, and instrumentation lines.
What are the specifications of the PARKER N4MT4 fitting?
The PARKER N4MT4 is a nylon compression tee fitting with three connections: two for 1/4 in OD tubing and one for 1/4 in pipe size. It is manufactured by PARKER under part number N4MT4 and is designed for reliable tube-to-pipe connections in low-pressure fluid systems.
Where to buy PARKER N4MT4 compression tee fitting worldwide?
3G Electric supplies the PARKER N4MT4 compression tee fitting worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this PARKER nylon fitting.
How to install a PARKER nylon compression tee fitting?
To install the PARKER N4MT4, cut the nylon tube squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten to avoid damaging the nylon.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
