PARKER Compression Fitting Adapter: 3/8 in OD x 1/4 in Pipe Size, Compression x MNPTF
The PARKER Compression Fitting Adapter (MPN N6MC4) is a general-purpose nylon compression fitting, type Compression x MNPTF, with a 3/8 in OD tube size and 1/4 in pipe size. 3G Electric interprets your demand for…
SKU 3G-OTH-475943
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Adapter (MPN N6MC4) is a general-purpose nylon compression fitting, type Compression x MNPTF, with a 3/8 in OD tube size and 1/4 in pipe size. 3G Electric interprets your demand for this adapter and delivers it as part of our broad industrial supply across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER N6MC4 compression fitting adapter used for?
The PARKER N6MC4 adapter connects 3/8 in OD nylon tubing to a 1/4 in male NPTF threaded port. It is used in pneumatic, instrumentation, and fluid-handling systems where a leak-tight, corrosion-resistant joint is needed. 3G Electric supplies this adapter globally.
What are the specifications of the PARKER N6MC4 compression fitting?
The PARKER N6MC4 is a Compression x MNPTF nylon adapter. Tube size is 3/8 in OD; pipe thread is 1/4 in NPTF. The nylon body resists chemicals and corrosion. 3G Electric sources this genuine PARKER part for worldwide delivery.
Where to buy PARKER N6MC4 compression fitting adapter worldwide?
3G Electric supplies the PARKER N6MC4 compression fitting adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us to order this genuine PARKER part for your industrial application.
How to install a PARKER nylon compression fitting adapter?
To install the PARKER N6MC4, cut tubing square, deburr, and slide the nut and ferrule over the tube. Insert tube fully into the adapter body, then hand-tighten the nut. Use a wrench for final turns—do not overtighten. 3G Electric can advise on best practices.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









