PARKER Compression Fitting Sleeve: 5/8 in OD Fitting Size, Compression, Brass
The PARKER Compression Fitting Sleeve (MPN 60C-10) is a standard brass compression sleeve for 5/8 in OD fittings, sold in a 10-pack. This component is part of our broader industrial supply across 14 departments, with…
SKU 3G-OTH-481925
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Sleeve (MPN 60C-10) is a standard brass compression sleeve for 5/8 in OD fittings, sold in a 10-pack. This component is part of our broader industrial supply across 14 departments, with specialist depth in fluid controls and pneumatics as an authorised distributor for brands like PARKER, ensuring you get the right part for your system.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression fitting sleeve used for?
A PARKER compression fitting sleeve, like the 60C-10, seals the joint between tubing and a fitting body in fluid and pneumatic systems. It is commonly used in instrumentation, hydraulic, and industrial process lines to create a leak-tight connection without welding or soldering.
What are the specifications of the PARKER 60C-10 compression sleeve?
The PARKER 60C-10 is a standard brass compression sleeve for 5/8 in OD tubing, sold in a 10-pack. It is manufactured by PARKER under MPN 60C-10. This component is part of our industrial supply across 14 departments, with specialist depth in fluid controls and pneumatics.
Where to buy PARKER compression fitting sleeves worldwide?
3G Electric supplies PARKER compression fitting sleeves like the 60C-10 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER parts and support your procurement needs across multiple departments.
How to install a PARKER compression sleeve on tubing?
To install a PARKER compression sleeve, slide the nut and sleeve onto the tubing, insert the tube into the fitting body until it seats, then tighten the nut. Over-tightening can deform the sleeve; follow the manufacturer's torque recommendations. Always use the correct sleeve size for your tubing OD.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
