PARKER Compression Tee Fitting: 1/2 in OD x 1/2 in OD x 1/2 in OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 164C-8) is a standard sleeve brass compression fitting with 1/2 in OD x 1/2 in OD x 1/2 in OD fitting size, supplied in a 10-pack. This product is part of 3G Electric's broad…
SKU 3G-OTH-481986
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 164C-8) is a standard sleeve brass compression fitting with 1/2 in OD x 1/2 in OD x 1/2 in OD fitting size, supplied in a 10-pack. This product is part of 3G Electric's broad industrial solutions across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubes of equal outside diameter in a T-shaped junction, commonly used in instrumentation, pneumatic, and hydraulic systems. It provides a leak-tight seal without soldering or welding, ideal for industrial fluid and gas lines.
What are the specifications of the PARKER 164C-8 compression tee fitting?
The PARKER 164C-8 is a standard sleeve brass compression tee fitting with a 1/2 in OD x 1/2 in OD x 1/2 in OD fitting size, supplied in a 10-pack. It is made of brass and is part of PARKER's compression fitting line for reliable tube connections.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine PARKER parts like the 164C-8 to any location, ensuring compliance with international shipping requirements.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee fitting, cut the tube squarely, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube into the fitting body until it seats, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid over-tightening to prevent damage.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
