PARKER Compression Fitting Elbow: 5/16 in OD x 1/8 in Pipe Size, Compression x MNPTF
The PARKER Compression Fitting Elbow (SKU 2ZTA3, MPN P5ME2) is a polypropylene compression tube fitting with a 5/16 in OD tube connection and a 1/8 in pipe size MNPTF thread. Designed as a Compression x MNPTF…
SKU 3G-OTH-473928
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (SKU 2ZTA3, MPN P5ME2) is a polypropylene compression tube fitting with a 5/16 in OD tube connection and a 1/8 in pipe size MNPTF thread. Designed as a Compression x MNPTF configuration, it meets NSF/ANSI 51 standards. 3G Electric interprets your demand for genuine industrial fittings, sourcing this PARKER component across our 14 departments, with specialist depth in fluid controls to support your application.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER P5ME2 compression fitting elbow used for?
The PARKER P5ME2 is a polypropylene compression fitting elbow used to connect 5/16 in OD tubing to a 1/8 in male NPTF threaded port. It is suitable for fluid handling applications requiring corrosion resistance and NSF/ANSI 51 compliance, such as in food processing or water systems.
What are the specifications of the PARKER P5ME2 compression fitting?
The PARKER P5ME2 is a Compression x MNPTF elbow with a 5/16 in OD tube connection and a 1/8 in pipe size male thread. It is made of polypropylene and meets NSF/ANSI 51 standards. The manufacturer part number is P5ME2.
Where to buy PARKER P5ME2 compression fittings worldwide?
3G Electric supplies the PARKER P5ME2 compression fitting elbow worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER components across 14 departments, including specialist expertise in fluid controls.
How to install a PARKER polypropylene compression fitting?
To install the PARKER P5ME2, ensure the tube is cut square and deburred. Slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten to avoid damaging the polypropylene.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER polypropylene compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









