PARKER Compression Fitting Elbow: 1/2 in OD x 1/4 in Pipe Size, Compression x MNPTF
The PARKER Compression Fitting Elbow (SKU 2ZTG8) is a polypropylene compression tube fitting with a 1/2 in OD x 1/4 in Pipe Size, configured as Compression x MNPTF. This FDA-approved component (MPN P8ME4) is part of…
SKU 3G-OTH-473836
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (SKU 2ZTG8) is a polypropylene compression tube fitting with a 1/2 in OD x 1/4 in Pipe Size, configured as Compression x MNPTF. This FDA-approved component (MPN P8ME4) is part of our curated industrial supply across 14 departments, with specialist depth in fluid-control components.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects tubing to a male NPT threaded port at a 90-degree angle. It is used in fluid-control systems requiring a leak-tight seal, such as food-processing or pharmaceutical lines, where the polypropylene material and FDA approval ensure chemical resistance and sanitary compliance.
What are the specifications of the PARKER P8ME4 compression fitting elbow?
The PARKER P8ME4 is a polypropylene compression fitting elbow with a 1/2 in OD tube connection and 1/4 in male NPTF thread. It is FDA approved for food-contact applications. The compression x MNPTF configuration provides a secure, leak-resistant joint in low-pressure fluid systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine PARKER components like the P8ME4 elbow and deliver them to your facility, ensuring compliance with your application requirements.
How to install a PARKER polypropylene compression fitting?
To install a PARKER polypropylene compression fitting, slide the nut and ferrule onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid over-tightening to prevent cracking the polypropylene material.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER polypropylene compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
