PARKER Compression Fitting Elbow: 3/4 in OD x 3/4 in OD Size, Compression x Compression
The PARKER Compression Fitting Elbow (MPN 12-12 EBZ-B) is a single-ferrule brass compression fitting with a 3/4 in OD x 3/4 in OD size, compression x compression type, part of the CPI™ series. 3G Electric interprets…
SKU 3G-OTH-598462
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN 12-12 EBZ-B) is a single-ferrule brass compression fitting with a 3/4 in OD x 3/4 in OD size, compression x compression type, part of the CPI™ series. 3G Electric interprets your demand for this OEM-sourced component and delivers it with specialist support across 14 industrial departments, including combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER CPI compression fitting elbow used for?
The PARKER CPI compression fitting elbow (12-12 EBZ-B) connects two 3/4 in OD tubes at a 90° angle in instrumentation and process systems. Its single-ferrule brass design provides reliable, leak-tight seals in pneumatic, hydraulic, and chemical applications where space is limited.
What are the specifications of the PARKER 12-12 EBZ-B compression fitting?
This PARKER compression fitting elbow has a 3/4 in OD x 3/4 in OD size, compression x compression type, and is made of brass. It is part of the CPI series (CPI trademark) and uses a single-ferrule design for secure tube connections in high-pressure systems.
Where to buy PARKER compression fittings worldwide?
3G Electric supplies the PARKER CPI compression fitting elbow (12-12 EBZ-B) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this OEM-sourced component.
How to install a single-ferrule brass compression fitting?
To install a PARKER CPI single-ferrule fitting, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1/4 to 1/2 turn for a leak-free seal. Avoid overtightening to prevent tube damage.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER single-ferrule brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









