PARKER Compression Tee Fitting: 1/4 in OD x 1/8 in Pipe x 1/4 in OD Fitting Size
The PARKER Compression Tee Fitting (MPN 4MRT2N-316) is a double-ferrule stainless steel fitting with sizes of 1/4 in OD x 1/8 in Pipe x 1/4 in OD. It is compatible with Parker A-LOK fitting brands.
SKU 3G-OTH-471857
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 4MRT2N-316) is a double-ferrule stainless steel fitting with sizes of 1/4 in OD x 1/8 in Pipe x 1/4 in OD. It is compatible with Parker A-LOK fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting 4MRT2N-316 used for?
This double-ferrule stainless steel tee fitting connects three tubing lines in instrumentation, hydraulic, and pneumatic systems. It joins 1/4 in OD tube to 1/8 in pipe and another 1/4 in OD tube, providing leak-tight sealing in high-pressure fluid or gas applications.
What are the specifications of the PARKER 4MRT2N-316 compression tee?
The PARKER 4MRT2N-316 is a double-ferrule stainless steel compression tee fitting. Fitting sizes are 1/4 in OD x 1/8 in Pipe x 1/4 in OD. It is compatible with Parker A-LOK fitting brands. The manufacturer part number is 4MRT2N-316.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies and delivers the PARKER 4MRT2N-316 compression tee fitting worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a double-ferrule compression tee fitting?
Insert the tube fully into the fitting until it bottoms on the shoulder. Hand-tighten the nut, then use a wrench to turn the nut 1-1/4 turns past hand-tight for 1/4 in OD tubing. Always follow Parker A-LOK installation guidelines to ensure a proper seal without over-tightening.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
