PARKER Compression Tee Fitting: 3/8 in OD x 3/8 in Pipe x 3/8 in OD Fitting Size
The PARKER Compression Tee Fitting (MPN 6MRT6N-316) is a double-ferrule stainless steel fitting with a 3/8 in OD x 3/8 in Pipe x 3/8 in OD size, compatible with Parker A-LOK brands. 3G Electric interprets your demand…
SKU 3G-OTH-471929
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 6MRT6N-316) is a double-ferrule stainless steel fitting with a 3/8 in OD x 3/8 in Pipe x 3/8 in OD size, compatible with Parker A-LOK brands. 3G Electric interprets your demand for this genuine industrial component, sourcing it across our 14 departments with specialist depth in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting 6MRT6N-316 used for?
This double-ferrule stainless steel tee fitting connects three tubes or pipes in instrumentation, hydraulic, and pneumatic systems. It is compatible with Parker A-LOK brands and is commonly used in chemical processing, oil and gas, and industrial fluid handling where leak-tight, vibration-resistant joints are required.
What are the specifications of the PARKER 6MRT6N-316 compression tee fitting?
The PARKER 6MRT6N-316 is a double-ferrule stainless steel compression tee fitting. It has a fitting size of 3/8 in OD x 3/8 in Pipe x 3/8 in OD. It is compatible with Parker A-LOK brands and is manufactured by PARKER. The material is stainless steel for corrosion resistance.
Where to buy the PARKER 6MRT6N-316 compression tee fitting worldwide?
3G Electric supplies the genuine PARKER 6MRT6N-316 compression tee fitting worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this double-ferrule stainless steel fitting for your application.
How to install a PARKER double-ferrule compression tee fitting?
Insert the tube fully into the fitting until it bottoms against the shoulder. Tighten the nut finger-tight, then use a wrench to tighten an additional 1-1/4 turns for stainless steel. Always follow Parker A-LOK installation guidelines and use proper tube support to avoid leaks. Do not over-tighten.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
