PARKER Compression Fitting Elbow: 3/4 in OD x 1/2 in Pipe Fitting Size
The PARKER Compression Fitting Elbow (MPN 12FEL8N-316) is a double-ferrule stainless steel fitting with a 3/4 in OD x 1/2 in Pipe Fitting Size, configured as Compression x FNPT. Compatible with Parker A-LOK fittings…
SKU 3G-OTH-471263
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN 12FEL8N-316) is a double-ferrule stainless steel fitting with a 3/4 in OD x 1/2 in Pipe Fitting Size, configured as Compression x FNPT. Compatible with Parker A-LOK fittings, this component is designed for secure tube-to-pipe connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Fitting Elbow 12FEL8N-316 used for?
This double-ferrule stainless steel elbow connects 3/4 in OD tubing to a 1/2 in FNPT pipe port. It is used in industrial fluid systems requiring a leak-tight, vibration-resistant joint, such as hydraulic, pneumatic, and instrumentation lines.
What are the specifications of the PARKER 12FEL8N-316 compression fitting?
The PARKER 12FEL8N-316 is a Compression x FNPT elbow with a 3/4 in OD tube size and 1/2 in pipe thread. It is made of stainless steel with a double-ferrule design and is compatible with Parker A-LOK fittings for secure tube-to-pipe connections.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies and delivers the PARKER 12FEL8N-316 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a double-ferrule compression fitting like the PARKER 12FEL8N-316?
Insert the tube fully into the fitting until it bottoms out, then hand-tighten the nut. Use a wrench to tighten the nut 1-1/4 turns past hand-tight for the first installation. For Parker A-LOK fittings, follow the manufacturer's recommended torque values to avoid over-tightening.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
