PARKER Metal Pipe Straight: Straight, Steel, 1 in x 1/4 in
The PARKER Metal Pipe Straight is a hydraulic threaded extreme-pressure pipe fitting, specifically a steel adapter with a 1 in x 1/4 in Male NPT Threaded x Female NPT Threaded configuration (MPN 1 X 1/4 PTR-S). It is…
SKU 3G-OTH-467344
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Metal Pipe Straight is a hydraulic threaded extreme-pressure pipe fitting, specifically a steel adapter with a 1 in x 1/4 in Male NPT Threaded x Female NPT Threaded configuration (MPN 1 X 1/4 PTR-S). It is rated for a maximum operating pressure of 4,500 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Metal Pipe Straight used for?
The PARKER Metal Pipe Straight is a hydraulic threaded extreme-pressure pipe fitting used to connect or adapt steel piping in high-pressure fluid power systems. It is commonly applied in industrial hydraulics, mobile equipment, and plant machinery where reliable sealing and pressure ratings up to 4,500 psi are required.
What are the specifications of the PARKER 1 X 1/4 PTR-S?
The PARKER 1 X 1/4 PTR-S is a steel adapter with a 1 in x 1/4 in Male NPT Threaded x Female NPT Threaded configuration. It has a maximum operating pressure of 4,500 psi and is classified as a connector type adapter. This fitting is designed for extreme-pressure hydraulic applications.
Where to buy PARKER pipe fittings worldwide?
3G Electric supplies PARKER pipe fittings like the 1 X 1/4 PTR-S to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine PARKER hydraulic fittings for demanding applications across multiple industries.
How to install a PARKER NPT pipe fitting?
To install a PARKER NPT pipe fitting, clean threads and apply a compatible thread sealant. Hand-tighten the male NPT end into the female port, then use a wrench to tighten 1-2 turns past hand-tight. Avoid over-tightening to prevent thread damage. Always verify pressure rating and system compatibility before installation.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER hydraulic threaded extreme-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
