PARKER Metal Pipe Cross: Cross, 1/2 in x 1/2 in x 1/2 in x 1/2 in, 1,900 psi
The PARKER Metal Pipe Cross (SKU 60UT72) is a threaded high-pressure pipe fitting with a 1/2 in x 1/2 in x 1/2 in x 1/2 in configuration, rated for a maximum operating pressure of 1,900 psi. This cross measures 2…
SKU 3G-OTH-477365
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Metal Pipe Cross (SKU 60UT72) is a threaded high-pressure pipe fitting with a 1/2 in x 1/2 in x 1/2 in x 1/2 in configuration, rated for a maximum operating pressure of 1,900 psi. This cross measures 2 7/16 in in length (MPN 1/2 KMMOO-B) and is designed for industrial piping systems requiring reliable fluid or gas distribution.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER Metal Pipe Cross used for?
A PARKER Metal Pipe Cross is a threaded high-pressure pipe fitting used to split fluid or gas flow in four directions in industrial piping systems. It is rated for 1,900 psi and is commonly applied in hydraulic, pneumatic, and process lines requiring reliable distribution.
What are the specifications of the PARKER 1/2 KMMOO-B pipe cross?
The PARKER 1/2 KMMOO-B pipe cross has a 1/2 in x 1/2 in x 1/2 in x 1/2 in configuration, a maximum operating pressure of 1,900 psi, and a length of 2 7/16 in. It is a threaded high-pressure pipe fitting designed for industrial fluid and gas systems.
Where to buy a PARKER pipe cross worldwide?
3G Electric supplies the PARKER pipe cross worldwide, handling full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER fittings like the 1/2 KMMOO-B and support procurement across 14 industrial departments.
How to install a PARKER threaded pipe cross?
To install a PARKER threaded pipe cross, apply thread sealant to male threads, hand-tighten the fitting, then use wrenches on the cross flats to torque to the manufacturer's recommended specification. Avoid over-tightening to prevent thread damage. Always verify pressure rating compatibility with your system.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
