PARKER Compression Tee Fitting: 3/4 in OD x 3/4 in Pipe x 3/4 in OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 172CA-12-12) is a self-aligning brass compression fitting sized for 3/4 in OD x 3/4 in Pipe x 3/4 in OD, supplied in a 6-pack. This fitting enables reliable tube-to-pipe…
SKU 3G-OTH-470614
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 172CA-12-12) is a self-aligning brass compression fitting sized for 3/4 in OD x 3/4 in Pipe x 3/4 in OD, supplied in a 6-pack. This fitting enables reliable tube-to-pipe connections in industrial fluid systems, backed by PARKER's engineering standards.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (172CA-12-12) creates reliable tube-to-pipe branch connections in industrial fluid systems. It is commonly used in pneumatic, hydraulic, and instrumentation lines where a leak-tight, self-aligning brass fitting is required for 3/4 in OD tubing and 3/4 in pipe.
What are the specifications of the PARKER Compression Tee Fitting 172CA-12-12?
This PARKER fitting is a self-aligning brass compression tee with a 3/4 in OD x 3/4 in Pipe x 3/4 in OD fitting size. It is supplied in a 6-pack (MPN 172CA-12-12). The brass construction provides corrosion resistance and durability for industrial fluid handling applications.
Where to buy the PARKER Compression Tee Fitting worldwide?
3G Electric supplies and delivers the PARKER Compression Tee Fitting (172CA-12-12) worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a PARKER brass compression tee fitting?
To install a PARKER compression tee, cut tubing squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per PARKER's recommended torque. Always pressure-test the joint before service.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER self-aligning brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
