PARKER Compression Tee Fitting: 1/8 in Pipe x 4 mm OD x 4 mm OD Fitting Size
The PARKER Compression Tee Fitting (MPN 0103 04 10) is a standard sleeve brass compression fitting with a 1/8 in pipe x 4 mm OD x 4 mm OD configuration. This brass fitting is designed for connecting tubing in…
SKU 3G-OTH-482191
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 0103 04 10) is a standard sleeve brass compression fitting with a 1/8 in pipe x 4 mm OD x 4 mm OD configuration. This brass fitting is designed for connecting tubing in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubing branches in industrial fluid systems. The 1/8 in pipe x 4 mm OD x 4 mm OD brass configuration is typical for pneumatic or hydraulic lines where a leak-tight, removable joint is needed.
What are the specifications of the PARKER 0103 04 10 compression tee?
The PARKER 0103 04 10 is a standard sleeve brass compression tee fitting. It has a 1/8 in pipe thread and two 4 mm OD tube ports. The brass construction resists corrosion in moderate-pressure fluid applications.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. We handle full logistics and customs clearance to deliver industrial components like the 0103 04 10 brass tee to your facility, regardless of location.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee, slide the nut and sleeve onto the tube, insert the tube fully into the fitting, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid overtightening to prevent tube deformation.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
