PARKER Compression Tee Fitting: 5 mm OD x 5 mm OD x 5 mm OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 0104 05 00) is a standard sleeve brass compression fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. 3G Electric interprets demand and…
SKU 3G-OTH-482271
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 0104 05 00) is a standard sleeve brass compression fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. 3G Electric interprets demand and delivers this genuine industrial component across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubes of equal outside diameter in a T-junction for pneumatic or hydraulic systems. It is commonly used in instrumentation, fluid power, and process control applications where a leak-tight, reusable brass fitting is required.
What are the specifications of the PARKER 0104 05 00 compression tee fitting?
The PARKER 0104 05 00 is a standard sleeve brass compression tee fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. It is made of brass and is designed for use with 5 mm outside diameter tubing.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies genuine PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver this component across 14 departments, including pneumatics and instrumentation.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee fitting, cut tubing squarely, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Do not overtighten.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
