PARKER Compression Tee Fitting: 4 mm OD x 4 mm OD x 1/8 in Pipe Fitting Size
The PARKER Compression Tee Fitting (MPN 0108 04 10) is a standard sleeve brass compression fitting designed for 4 mm OD x 4 mm OD x 1/8 in pipe connections. This brass fitting enables reliable branching in tubing…
SKU 3G-OTH-482007
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 0108 04 10) is a standard sleeve brass compression fitting designed for 4 mm OD x 4 mm OD x 1/8 in pipe connections. This brass fitting enables reliable branching in tubing systems, supporting precise fluid or gas routing in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (MPN 0108 04 10) is used to create a reliable branch connection in tubing systems, enabling precise routing of fluids or gases in industrial applications such as pneumatics, hydraulics, and instrumentation.
What are the specifications of the PARKER 0108 04 10 fitting?
This PARKER compression tee fitting is made of brass and has a standard sleeve design. It connects 4 mm OD tubing on two ports and a 1/8 in pipe thread on the third port. The manufacturer part number is 0108 04 10.
Where to buy PARKER compression fittings worldwide?
3G Electric supplies PARKER compression fittings like the 0108 04 10 to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive the correct brass tee fitting for your industrial tubing system.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee fitting, cut tubing squarely, deburr the ends, and slide the nut and sleeve onto the tube. Insert the tube into the fitting body until it seats, then tighten the nut by hand and a further 1-1.25 turns with a wrench.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
