PARKER Compression Tee Fitting: 6 mm OD x 6 mm OD x 1/4 in Pipe Fitting Size
The PARKER Compression Tee Fitting (MPN 0108 06 13) is a standard sleeve brass compression fitting with 6 mm OD x 6 mm OD x 1/4 in Pipe fitting sizes. As a PARKER product, it is a genuine industrial component for…
SKU 3G-OTH-481999
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 0108 06 13) is a standard sleeve brass compression fitting with 6 mm OD x 6 mm OD x 1/4 in Pipe fitting sizes. As a PARKER product, it is a genuine industrial component for tubing connections.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubing lines in a T-junction, commonly used in pneumatic, hydraulic, and instrumentation systems. This brass fitting with 6 mm OD x 6 mm OD x 1/4 in pipe sizes provides leak-resistant joints for industrial fluid or gas handling.
What are the specifications of the PARKER 0108 06 13 compression tee fitting?
The PARKER 0108 06 13 is a standard sleeve brass compression tee fitting. It has three connection ports: two for 6 mm OD tubing and one for 1/4 in pipe. The material is brass, and it is a genuine PARKER component for reliable tubing connections.
Where to buy a PARKER compression tee fitting worldwide?
3G Electric supplies the PARKER compression tee fitting (0108 06 13) to customers worldwide. We handle full logistics, customs clearance, and delivery for global orders. Contact us to source this genuine brass fitting for your industrial application.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee fitting, cut tubing squarely, deburr the ends, and slide the nut and sleeve onto each tube. Insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid overtightening to prevent damage.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
