PARKER Compression Tee Fitting: 12 mm OD x 12 mm OD x 3/8 in Pipe Fitting Size
The PARKER Compression Tee Fitting (MPN 0108 12 17) is a standard sleeve brass compression fitting with 12 mm OD x 12 mm OD x 3/8 in pipe fitting size. This tee configuration enables branching in tubing systems…
SKU 3G-OTH-482028
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Tee Fitting (MPN 0108 12 17) is a standard sleeve brass compression fitting with 12 mm OD x 12 mm OD x 3/8 in pipe fitting size. This tee configuration enables branching in tubing systems, constructed from brass for durability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (0108 12 17) is used to create a branch connection in brass tubing systems. It is commonly applied in pneumatic, hydraulic, and instrumentation lines where a reliable, leak-resistant joint is needed at a 90-degree branch point.
What are the specifications of the PARKER Compression Tee Fitting 0108 12 17?
This PARKER fitting is a standard sleeve brass compression tee with 12 mm OD x 12 mm OD x 3/8 in pipe fitting size. The brass construction provides corrosion resistance and durability for industrial fluid and gas handling applications.
Where to buy the PARKER Compression Tee Fitting worldwide?
3G Electric supplies the PARKER Compression Tee Fitting (0108 12 17) to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive genuine PARKER brass compression fittings for your industrial tubing needs.
How to install a PARKER brass compression tee fitting?
To install a PARKER compression tee, cut tubing squarely, deburr the ends, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines to create a leak-proof seal.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
