PARKER Tube Insert: 5 mm OD Fitting Size, Compression, Brass
The PARKER Tube Insert is a standard sleeve brass compression fitting for 5 mm OD tubing, with an overall length of 11 1/2 mm (MPN 0127 05 00). 3G Electric sources this genuine PARKER component across 14 industrial…
SKU 3G-OTH-482014
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Tube Insert is a standard sleeve brass compression fitting for 5 mm OD tubing, with an overall length of 11 1/2 mm (MPN 0127 05 00). 3G Electric sources this genuine PARKER component across 14 industrial departments, with specialist expertise in combustion, pumps, and controls ensuring accurate specification and support.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Tube Insert 0127 05 00 used for?
The PARKER Tube Insert is a standard sleeve brass compression fitting used to seal and secure 5 mm OD tubing in pneumatic, hydraulic, and fluid-handling systems. It is commonly applied in industrial machinery, instrumentation, and process control lines where reliable, leak-free connections are required.
What are the specifications of the PARKER Tube Insert 0127 05 00?
This PARKER Tube Insert is a compression-type brass fitting for 5 mm OD tubing, with an overall length of 11 1/2 mm. The manufacturer part number is 0127 05 00. It is designed for use with standard compression fittings to create a secure, leak-resistant joint in low- to medium-pressure applications.
Where to buy the PARKER Tube Insert 0127 05 00 worldwide?
3G Electric supplies the genuine PARKER Tube Insert 0127 05 00 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this component across 14 departments, with specialist expertise in combustion, pumps, and controls to ensure correct specification.
How to install the PARKER Tube Insert 0127 05 00?
To install the PARKER Tube Insert, slide the compression nut and sleeve onto the 5 mm OD tube, then insert the tube fully into the fitting body. Tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent tube deformation. Always follow the manufacturer's guidelines for torque and tube support.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
