PARKER Compression Fitting Adapter: 1/2 in Pipe x 15 mm OD Fitting Size, BSPT x Compression
The PARKER Compression Fitting Adapter (MPN 0109 15 21) is a standard sleeve brass compression fitting with a 1/2 in pipe x 15 mm OD fitting size, type BSPT x Compression. 3G Electric interprets your demand for this…
SKU 3G-OTH-482234
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Adapter (MPN 0109 15 21) is a standard sleeve brass compression fitting with a 1/2 in pipe x 15 mm OD fitting size, type BSPT x Compression. 3G Electric interprets your demand for this genuine PARKER adapter, sources it across our global supply network, and supports your application with specialist expertise in fluid controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Compression Fitting Adapter 0109 15 21 used for?
This PARKER adapter connects a 1/2 in BSPT male pipe thread to a 15 mm OD compression tube end, typically used in fluid power, pneumatic, and hydraulic systems for leak-free sealing in industrial piping.
What are the specifications of the PARKER 0109 15 21?
The PARKER 0109 15 21 is a standard sleeve brass compression fitting with a 1/2 in pipe x 15 mm OD fitting size, BSPT x Compression type, made of brass. It is manufactured by PARKER under MPN 0109 15 21.
Where to buy the PARKER 0109 15 21 worldwide?
3G Electric supplies the genuine PARKER 0109 15 21 compression fitting adapter worldwide. We handle full logistics, customs clearance, and delivery to your site, ensuring you receive the correct PARKER part for your fluid control application.
How to install a PARKER brass compression fitting adapter?
To install the PARKER 0109 15 21, slide the compression nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer torque specs. Avoid over-tightening to prevent brass deformation.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
