PARKER Push-Fit Elbow Fitting: 1/8 in OD x 1/4 in Pipe Size, Push-to-Connect x MNPTF
The PARKER Push-Fit Elbow Fitting (MPN W169PLP-2-4) is a nickel-plated brass tube fitting with a Push-to-Connect x MNPTF connection type, designed for 1/8 in OD tube and 1/4 in Pipe Size. This silver-finished fitting…
SKU 3G-OTH-482343
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Push-Fit Elbow Fitting (MPN W169PLP-2-4) is a nickel-plated brass tube fitting with a Push-to-Connect x MNPTF connection type, designed for 1/8 in OD tube and 1/4 in Pipe Size. This silver-finished fitting is part of our broad industrial solutions across 14 departments, with specialist depth in fluid controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER Push-Fit Elbow Fitting used for?
The PARKER Push-Fit Elbow Fitting (W169PLP-2-4) is used to connect 1/8 in OD tubing to a 1/4 in male NPT threaded port in pneumatic or low-pressure fluid systems. Its push-to-connect design enables tool-free installation, making it ideal for industrial automation, packaging, and material handling applications.
What are the specifications of the PARKER W169PLP-2-4 fitting?
This PARKER fitting is a nickel-plated brass elbow with a Push-to-Connect x MNPTF connection. It accepts 1/8 in OD tube and has a 1/4 in pipe size. The silver finish resists corrosion. It is designed for use with thermoplastic or polyurethane tubing in pneumatic systems up to moderate pressures.
Where to buy PARKER push-fit fittings in worldwide?
3G Electric supplies PARKER push-fit fittings like the W169PLP-2-4 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER components and support your procurement across 14 departments, including fluid controls.
How to install a PARKER push-to-connect elbow fitting?
To install the PARKER push-fit elbow, cut tubing square, deburr, and push fully into the collet until it stops. For removal, press the release collar and pull the tube out. Ensure the MNPTF threads are sealed with PTFE tape or sealant before tightening. Do not overtighten the brass fitting.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









