PARKER Compression Fitting Elbow: 1/4 in OD x 1/8 in Pipe Fitting Size, Compression x MNPTF
The PARKER Compression Fitting Elbow (MPN 179C-4-2) is a standard sleeve brass compression fitting with a 1/4 in OD x 1/8 in pipe fitting size, configured as Compression x MNPTF. This brass fitting provides a…
SKU 3G-OTH-482143
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN 179C-4-2) is a standard sleeve brass compression fitting with a 1/4 in OD x 1/8 in pipe fitting size, configured as Compression x MNPTF. This brass fitting provides a reliable connection for industrial tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER 179C-4-2 compression fitting elbow used for?
The PARKER 179C-4-2 is a standard sleeve brass compression fitting elbow used to connect 1/4 in OD tubing to a 1/8 in male NPT threaded port. It provides a reliable, leak-resistant joint in industrial pneumatic, hydraulic, and instrumentation tubing systems.
What are the specifications of the PARKER 179C-4-2?
The PARKER 179C-4-2 is a brass compression fitting elbow with a 1/4 in OD tube size and 1/8 in male NPTF thread. It features a standard sleeve design for secure tubing connections. The manufacturer part number is 179C-4-2.
Where to buy the PARKER 179C-4-2 worldwide?
3G Electric supplies the PARKER 179C-4-2 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this brass fitting.
How to install a PARKER compression fitting elbow?
To install the PARKER 179C-4-2, insert the tube fully into the fitting, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for standard sleeve fittings. Avoid overtightening to prevent tube deformation. Always follow Parker's installation guidelines.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
