Parker Replacement Kit: 4MA
The PARKER Replacement Kit: 4MA, PK4004MA05 is a piston seal kit for tie rod pneumatic actuators. This kit is designed for the 4MA series and is manufactured by PARKER. It is identified by manufacturer part number…
SKU 3G-OTH-142964
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Replacement Kit: 4MA, PK4004MA05 is a piston seal kit for tie rod pneumatic actuators. This kit is designed for the 4MA series and is manufactured by PARKER. It is identified by manufacturer part number PK4004MA05.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER PK4004MA05 replacement kit used for?
The PARKER PK4004MA05 is a piston seal kit designed for tie rod pneumatic actuators in the 4MA series. It is used to replace worn seals, restoring actuator performance and preventing air leakage in industrial automation, packaging, and material handling applications.
What are the specifications of the PARKER PK4004MA05 seal kit?
The PARKER PK4004MA05 is a piston seal kit for the 4MA series tie rod pneumatic actuators. The manufacturer part number is PK4004MA05, and it is produced by PARKER. This kit contains the seals needed to rebuild the piston section of compatible actuators.
Where to buy the PARKER PK4004MA05 seal kit worldwide?
You can source the PARKER PK4004MA05 seal kit through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive genuine PARKER components for your pneumatic actuator maintenance needs.
How to install the PARKER PK4004MA05 piston seal kit?
To install the PARKER PK4004MA05 piston seal kit, first depressurize and disassemble the 4MA series actuator. Remove old seals, clean all sealing surfaces, and lubricate new seals with compatible grease before fitting. Reassemble carefully to avoid damaging seals. Always follow PARKER's published guidelines for torque and assembly.
Digunakan dalam
Aplikasi umum untuk ParkerParker Produk
3G Electric memasok Parker seal kits for tie rod pneumatic actuators. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.