Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
PARKER VS222P-2-2-112 Threaded High-Pressure Pipe Fitting with Sealant - Threaded High-Pressure Pipe Fittings with Sealant
PARKERThreaded High-Pressure Pipe Fittings with Sealant

PARKER VS222P-2-2-112 Threaded High-Pressure Pipe Fitting with Sealant

PARKER Metal Pipe Straight adalah fitting pipa bertekanan tinggi berulir yang dirancang untuk sambungan lurus pada sistem perpipaan industri. Tipe ini memiliki konfigurasi Female NPT Threaded x Male NPT Threaded…

SKU 3G-OTH-467850

Juga terdaftar sebagai: VS222P22112 · VS222P 2 2 112

Merek
PARKER
Item
VS222P-2-2-112 Threaded High-Pressure Pipe Fitting with Sealant
Kategori
Threaded High-Pressure Pipe Fittings with Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

PARKER
Manufacturer Part Number
VS222P-2-2-112
Type
1/8 in x 1/8 in, Female NPT Threaded x Male NPT Threaded
Maximum Operating Pressure
1,000 psi

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

PARKER Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

PARKER Metal Pipe Straight adalah fitting pipa bertekanan tinggi berulir yang dirancang untuk sambungan lurus pada sistem perpipaan industri. Tipe ini memiliki konfigurasi Female NPT Threaded x Male NPT Threaded dengan ukuran 1/8 in x 1/8 in, dan mampu menahan tekanan operasi maksimum hingga 1,000 psi. Fitting ini dilengkapi sealant bawaan untuk memastikan sambungan kedap udara dan cocok digunakan dalam berbagai aplikasi peralatan pembakaran dan sistem fluida bertekanan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi PARKER Metal Pipe Straight VS222P-2-2-112?

PARKER Metal Pipe Straight tipe VS222P-2-2-112 memiliki ukuran 1/8 in x 1/8 in dengan ulir Female NPT Threaded x Male NPT Threaded. Tekanan operasi maksimum mencapai 1,000 psi. Fitting ini sudah dilengkapi sealant untuk mencegah kebocoran pada sambungan.

Untuk apa PARKER Metal Pipe Straight digunakan?

PARKER Metal Pipe Straight digunakan sebagai fitting sambungan lurus pada sistem perpipaan bertekanan tinggi, seperti pada rangkaian gas, sistem bahan bakar, atau jalur fluida di pembakar industri. Desain berulir NPT memudahkan pemasangan tanpa perlu alat khusus.

Di mana beli PARKER Metal Pipe Straight di Indonesia?

Anda dapat membeli PARKER Metal Pipe Straight melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga Anda dapat menerima fitting berkualitas ini dengan mudah.

Bagaimana cara memilih PARKER Metal Pipe Straight yang tepat?

Pilih PARKER Metal Pipe Straight berdasarkan ukuran ulir dan tekanan operasi yang dibutuhkan. Untuk aplikasi dengan tekanan hingga 1,000 psi, tipe VS222P-2-2-112 dengan ukuran 1/8 in x 1/8 in dan ulir Female NPT x Male NPT adalah pilihan yang sesuai.

Digunakan dalam

Aplikasi umum untuk PARKER
Injection molding machine proportional directional control — Parker solenoid coils and proportional valve cartridges for mold-closing and hydraulic actuation circuits
Construction equipment hydraulic steering and boom control — Parker directional control valves with solenoid actuation for excavator and loader hydraulic systems
Industrial press forming systems — Parker pressure-relief and proportional directional valves for tonnage control and cycle sequencing
Material-handling conveyor systems — Parker proportional control valves with solenoid pilot stages for smooth load acceleration and deceleration
Tire-building machinery — Parker solenoid-actuated directional cartridges for synchronized multi-axis hydraulic positioning
Forestry and mobile equipment — Parker valve spools and solenoid assemblies rated for harsh-environment hydraulic circuits and mobile-duty pressure cycling

PARKER Produk

3G Electric memasok PARKER threaded high-pressure pipe fittings with sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari PARKER

Lihat semua PARKER suku cadang →
Threaded high-pressure pipe fitting with factory-applied sealant. Connects two male NPT threaded ports in hydraulic or pneumatic systems. Rated for maximum operating pressure of 1,000 psi
PARKER
Threaded high-pressure pipe fitting with factory-applied sealant. Connects two male NPT threaded ports in hydraulic or pneumatic systems. Rated for maximum operating pressure of 1,000 psi
This hex drive cored plug is a 1/2-inch NPT threaded pipe fitting made from C36000 brass. It has a length of 31/32 inches and a maximum operating pressure of 1,000 psi. Used to seal threaded ports in high-pressure hydraulic and pneumatic systems, manifolds, and valve blocks
PARKER
This hex drive cored plug is a 1/2-inch NPT threaded pipe fitting made from C36000 brass. It has a length of 31/32 inches and a maximum operating pressure of 1,000 psi. Used to seal threaded ports in high-pressure hydraulic and pneumatic systems, manifolds, and valve blocks
Threaded high-pressure pipe fitting with sealant, 1/2 in x 1/2 in, Female NPT Threaded x Male NPT Threaded. Maximum operating pressure 1,000 psi. Used to connect pipes or hoses in a straight line in fluid systems
PARKER
Threaded high-pressure pipe fitting with sealant, 1/2 in x 1/2 in, Female NPT Threaded x Male NPT Threaded. Maximum operating pressure 1,000 psi. Used to connect pipes or hoses in a straight line in fluid systems
Straight pipe fitting with sealant for connecting male NPT-threaded components in hydraulic or pneumatic systems. Features 1/4 in Female NPT x 1/4 in Male NPT connections and a maximum operating pressure of 1,000 psi
PARKER
Straight pipe fitting with sealant for connecting male NPT-threaded components in hydraulic or pneumatic systems. Features 1/4 in Female NPT x 1/4 in Male NPT connections and a maximum operating pressure of 1,000 psi
Threaded high-pressure pipe fitting with sealant, straight configuration. Connects 1/2 in female NPT to 3/8 in male NPT threads. Rated for maximum operating pressure of 1,000 psi. Used in hydraulic and pneumatic systems for adapting between different port sizes
PARKER
Threaded high-pressure pipe fitting with sealant, straight configuration. Connects 1/2 in female NPT to 3/8 in male NPT threads. Rated for maximum operating pressure of 1,000 psi. Used in hydraulic and pneumatic systems for adapting between different port sizes
Threaded high-pressure pipe tee with sealant, made from C37700 brass. Measures 2 21/64 in length and rated for 1,000 psi maximum operating pressure. Used to split or combine fluid flow in industrial piping systems
PARKER
Threaded high-pressure pipe tee with sealant, made from C37700 brass. Measures 2 21/64 in length and rated for 1,000 psi maximum operating pressure. Used to split or combine fluid flow in industrial piping systems
This threaded high-pressure pipe fitting is a straight connector with a 1-inch male NPT thread and a 3/4-inch female NPT thread. It is designed for use in hydraulic and pneumatic systems where leak-free connections are required at operating pressures up to 1,000 psi. The fitting includes sealant to ensure reliable sealing
PARKER
This threaded high-pressure pipe fitting is a straight connector with a 1-inch male NPT thread and a 3/4-inch female NPT thread. It is designed for use in hydraulic and pneumatic systems where leak-free connections are required at operating pressures up to 1,000 psi. The fitting includes sealant to ensure reliable sealing
Threaded high-pressure pipe fitting with factory-applied sealant for immediate installation. 3/8 in NPT male thread, maximum operating pressure 1,000 psi. Constructed from C36000 brass. Length 25/32 in. Used to seal ports in hydraulic and pneumatic systems
PARKER
Threaded high-pressure pipe fitting with factory-applied sealant for immediate installation. 3/8 in NPT male thread, maximum operating pressure 1,000 psi. Constructed from C36000 brass. Length 25/32 in. Used to seal ports in hydraulic and pneumatic systems