Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
PCS CPH13-10 Hard Core Pin, 3/16 in Dia, 10 in Lg, 50 HRC - Hard Core Pins
PCSHard Core Pins

PCS CPH13-10 Hard Core Pin, 3/16 in Dia, 10 in Lg, 50 HRC

PCS Hard Core Pin berbahan baja adalah pin inti keras yang dirancang untuk aplikasi industri yang membutuhkan presisi tinggi dan ketahanan aus. Dengan spesifikasi tipe Min 50 HRC Core / 50 HRC Surface, pin ini…

SKU 3G-OTH-244109

Juga terdaftar sebagai: CPH1310 · CPH13 10

Merek
PCS
Item
CPH13-10 Hard Core Pin, 3/16 in Dia, 10 in Lg, 50 HRC
Part Number
CPH13-10
Kategori
Hard Core Pins
Tersedia untuk Dipesan
Also known as:CPH13-10PCS
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

PCS
Manufacturer Part Number
CPH13-10
Type
Min 50 HRC Core / 50 HRC Surface
Overall Lg
10 in
Nom. Dia.
3/16 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

PCS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

PCS Hard Core Pin berbahan baja adalah pin inti keras yang dirancang untuk aplikasi industri yang membutuhkan presisi tinggi dan ketahanan aus. Dengan spesifikasi tipe Min 50 HRC Core / 50 HRC Surface, pin ini memiliki diameter nominal 3/16 in dan panjang keseluruhan 10 in. Produk ini cocok digunakan sebagai alat bantu dalam proses perakitan atau pemasangan komponen di berbagai sektor peralatan industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa PCS Hard Core Pin digunakan?

PCS Hard Core Pin digunakan sebagai pin inti keras dalam aplikasi industri yang memerlukan presisi dan ketahanan aus tinggi. Pin ini membantu dalam proses perakitan atau pemasangan komponen dengan toleransi ketat, berkat spesifikasi Min 50 HRC Core / 50 HRC Surface dan diameter nominal 3/16 in.

Apa spesifikasi PCS Hard Core Pin CPH13-10?

Spesifikasi PCS Hard Core Pin CPH13-10 meliputi tipe Min 50 HRC Core / 50 HRC Surface, diameter nominal 3/16 in, panjang keseluruhan 10 in, toleransi diameter +0.062/-0.000 in, toleransi permukaan +0.0005/0.0010 in, dan ukuran chamfer 1/32 in. Produk ini berbahan baja dan diproduksi oleh PCS.

Di mana beli PCS Hard Core Pin di Indonesia?

Anda dapat membeli PCS Hard Core Pin CPH13-10 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar ke lokasi industri Anda.

Bagaimana cara memilih PCS Hard Core Pin yang tepat?

Untuk memilih PCS Hard Core Pin yang tepat, perhatikan spesifikasi seperti diameter nominal 3/16 in, panjang keseluruhan 10 in, dan tingkat kekerasan Min 50 HRC Core / 50 HRC Surface. Pastikan toleransi dimensi sesuai kebutuhan aplikasi Anda, seperti toleransi diameter +0.062/-0.000 in dan toleransi permukaan +0.0005/0.0010 in.

Digunakan dalam

Aplikasi umum untuk PCS
Injection molding — PCS stepped ejector pins (e.g., SP3-83) for ejecting parts from core cavities
Die casting — PCS hard core pins (e.g., CPH15-3) for forming internal features in aluminum or zinc dies
Slide actuation — PCS radius angle pins (e.g., APR33-L10) for guiding core pulls in mold bases
Mold support — PCS support pillars (e.g., 1550) to prevent plate deflection in large injection molds
Ejector plate alignment — PCS shoulder bushings (e.g., BU-102) for guiding ejector pins in mold bases
Wear protection — PCS stop discs (e.g., SD-15) to limit ejector stroke and prevent over-travel damage
Not sure this is the right part? Photo-identify it→

PCS Produk

3G Electric memasok PCS hard core pins. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
80/20
80/20
This inch-system end cap is made of ABS plastic with a matte yellow finish. It measures 3 inches in length, 13/64 inches in thickness, and 1 1/2 inches in height, designed for a 0.328 inch slot width. The cap includes fasteners and is used to close the open ends of T-slot framing profiles, providing a finished appearance and protecting the interior from debris
80/20
80/20
This ABS end cap seals the open ends of inch-system 15 Series T-slot profiles with a 0.328 in slot width. It measures 4 1/2 in x 13/64 in x 1 1/2 in, has a matte yellow finish, and includes fasteners for installation. Commonly used in industrial framing, machine guards, workstations, and automation structures to protect against debris and provide a finished appearance
80/20
80/20
This end cap is designed to close off the open ends of 15 Series inch-profile T-slot aluminum framing. It is made of ABS with a matte yellow finish and measures 3 in x 13/64 in x 3 in, fitting a 0.328 in slot width. Fasteners are included for secure attachment. Suitable for use in structural framing systems to provide a finished appearance and protect against debris
80/20
80/20
This inch-system ABS end cap closes off open ends of 15 Series T-slot framing profiles. It provides a finished appearance, protects the profile interior from debris, and reduces sharp edges. Includes fasteners. Measures 3 in x 13/64 in x 1 1/2 in, matte gray, for 0.328 in slot width
80/20
80/20
This linear bearing pad is made from UHMW PE housing material with a smooth finish. It measures 2 25/32 inches in length, 1 1/4 inches in width, and 3/8 inches in height, and is white in color. Used in industrial framing and automation systems to reduce friction and wear between moving parts, commonly applied in conveyor guides, slide rails, and low-speed linear motion assemblies
80/20
80/20
This ABS end cap seals open ends of inch-system T-slot aluminum framing profiles. It protects against debris ingress, provides a finished appearance, and reduces sharp edges. Includes fasteners for secure attachment. Dimensions: 3 in x 1/8 in x 1 in, fits 0.257 in slot width

Lainnya dari PCS

Lihat semua PCS suku cadang →
Hard core pin with a nominal diameter of 7/32 in and overall length of 3 in. Made of steel with a minimum core and surface hardness of 50 HRC. Used in jigs, fixtures, and tooling for locating or aligning workpieces during machining or assembly
PCS
Hard core pin with a nominal diameter of 7/32 in and overall length of 3 in. Made of steel with a minimum core and surface hardness of 50 HRC. Used in jigs, fixtures, and tooling for locating or aligning workpieces during machining or assembly
Hardened steel core pin with a nominal diameter of 1/4 in and overall length of 10 in. Core and surface hardness minimum 50 HRC. Diameter tolerance +0.062/-0.000 in, straightness tolerance +0.0005/0.0010 in, chamfer 1/32 in. Used for locating, positioning, or ejecting workpieces in tooling and fixturing applications
PCS
Hardened steel core pin with a nominal diameter of 1/4 in and overall length of 10 in. Core and surface hardness minimum 50 HRC. Diameter tolerance +0.062/-0.000 in, straightness tolerance +0.0005/0.0010 in, chamfer 1/32 in. Used for locating, positioning, or ejecting workpieces in tooling and fixturing applications
Hard core pin with 7/16 in nominal diameter and 6 in overall length. Diameter tolerance +0.062/-0.000 in, length tolerance +0.0005/0.0010 in, with 1/32 in chamfer. Minimum core and surface hardness of 50 HRC. Used in industrial fixturing, jig building, and tooling for precise alignment and wear resistance
PCS
Hard core pin with 7/16 in nominal diameter and 6 in overall length. Diameter tolerance +0.062/-0.000 in, length tolerance +0.0005/0.0010 in, with 1/32 in chamfer. Minimum core and surface hardness of 50 HRC. Used in industrial fixturing, jig building, and tooling for precise alignment and wear resistance

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first