Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
PCS CPH17-6 Hard Core Pin, 1/4 in Dia, 6 in Lg, 50 HRC - Hard Core Pins
PCSHard Core Pins

PCS CPH17-6 Hard Core Pin, 1/4 in Dia, 6 in Lg, 50 HRC

PCS Hard Core Pin berbahan baja dengan kekerasan inti dan permukaan minimal 50 HRC, dirancang untuk aplikasi penempatan presisi di peralatan industri. Pin ini memiliki diameter nominal 1/4 inci dengan toleransi…

SKU 3G-OTH-244118

Juga terdaftar sebagai: CPH176 · CPH17 6

Merek
PCS
Item
CPH17-6 Hard Core Pin, 1/4 in Dia, 6 in Lg, 50 HRC
Part Number
CPH17-6
Kategori
Hard Core Pins
Tersedia untuk Dipesan
Also known as:CPH17-6PCS
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

PCS
Manufacturer Part Number
CPH17-6
Type
Min 50 HRC Core / 50 HRC Surface
Overall Lg
6 in
Nom. Dia.
1/4 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

PCS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

PCS Hard Core Pin berbahan baja dengan kekerasan inti dan permukaan minimal 50 HRC, dirancang untuk aplikasi penempatan presisi di peralatan industri. Pin ini memiliki diameter nominal 1/4 inci dengan toleransi +0,062/-0,000 inci, panjang keseluruhan 6 inci, dan toleransi diameter +0,0005/0,0010 inci. Cocok digunakan sebagai pasak atau pin pengarah pada cetakan, fixture, dan peralatan mekanis yang memerlukan ketahanan aus tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi PCS Hard Core Pin CPH17-6?

PCS Hard Core Pin CPH17-6 memiliki diameter nominal 1/4 inci dengan toleransi +0,062/-0,000 inci, panjang keseluruhan 6 inci, toleransi diameter +0,0005/0,0010 inci, dan kekerasan inti serta permukaan minimal 50 HRC. Produk ini terbuat dari baja dengan ujung chamfer 1/32 inci.

Untuk apa PCS Hard Core Pin digunakan?

PCS Hard Core Pin digunakan sebagai pasak presisi atau pin pengarah pada cetakan, fixture, dan peralatan mekanis industri. Kekerasan inti dan permukaan minimal 50 HRC memastikan ketahanan aus tinggi pada aplikasi yang memerlukan akurasi posisi dan daya tahan.

Bagaimana cara memilih PCS Hard Core Pin yang tepat?

Pilih PCS Hard Core Pin berdasarkan diameter nominal dan panjang yang dibutuhkan aplikasi Anda. Untuk CPH17-6, diameter nominal 1/4 inci dan panjang 6 inci. Pastikan toleransi diameter +0,0005/0,0010 inci sesuai dengan kebutuhan presisi Anda. Kekerasan 50 HRC cocok untuk aplikasi beban sedang hingga berat.

Di mana beli PCS Hard Core Pin di Indonesia?

Anda dapat membeli PCS Hard Core Pin CPH17-6 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk minta penawaran.

Digunakan dalam

Aplikasi umum untuk PCS
Injection molding — PCS stepped ejector pins (e.g., SP3-83) for ejecting parts from core cavities
Die casting — PCS hard core pins (e.g., CPH15-3) for forming internal features in aluminum or zinc dies
Slide actuation — PCS radius angle pins (e.g., APR33-L10) for guiding core pulls in mold bases
Mold support — PCS support pillars (e.g., 1550) to prevent plate deflection in large injection molds
Ejector plate alignment — PCS shoulder bushings (e.g., BU-102) for guiding ejector pins in mold bases
Wear protection — PCS stop discs (e.g., SD-15) to limit ejector stroke and prevent over-travel damage
Not sure this is the right part? Photo-identify it→

PCS Produk

3G Electric memasok PCS hard core pins. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
80/20
80/20
This inch-system ABS end cap closes off open ends of 15 Series T-slot framing profiles. It provides a finished appearance, protects the profile interior from debris, and reduces sharp edges. Includes fasteners. Measures 3 in x 13/64 in x 1 1/2 in, matte gray, for 0.328 in slot width
80/20
80/20
This ABS end cap seals the open ends of inch-system 15 Series T-slot profiles with a 0.328 in slot width. It measures 4 1/2 in x 13/64 in x 1 1/2 in, has a matte yellow finish, and includes fasteners for installation. Commonly used in industrial framing, machine guards, workstations, and automation structures to protect against debris and provide a finished appearance
Plastic pH electrode with a measurement range of 0 to 14 pH. Features a Porous Pin junction and includes a 1 m cable length. Designed for pH testing in laboratory applications such as routine water quality testing and environmental analysis
HACH
Plastic pH electrode with a measurement range of 0 to 14 pH. Features a Porous Pin junction and includes a 1 m cable length. Designed for pH testing in laboratory applications such as routine water quality testing and environmental analysis
80/20
80/20
This inch-system end cap is made of ABS plastic with a matte yellow finish. It measures 3 inches in length, 13/64 inches in thickness, and 1 1/2 inches in height, designed for a 0.328 inch slot width. The cap includes fasteners and is used to close the open ends of T-slot framing profiles, providing a finished appearance and protecting the interior from debris
80/20
80/20
Non-locking handle pawl kit for 10 Series to 15 Series aluminum profiles. Steel construction with zinc finish. Includes fasteners. Used for access panels on enclosures, machine guarding, and custom framing
80/20
80/20
This non-locking handle pawl kit is constructed from steel with a zinc finish and includes fasteners. Designed for 10 Series T-slot framing systems, it provides a furniture-style grip for manual operation of doors, panels, and enclosures. Dimensions: 1-1/4 in x 3/4 in x 21/32 in

Lainnya dari PCS

Lihat semua PCS suku cadang →
Hard core pin with a nominal diameter of 7/32 in and overall length of 3 in. Made of steel with a minimum core and surface hardness of 50 HRC. Used in jigs, fixtures, and tooling for locating or aligning workpieces during machining or assembly
PCS
Hard core pin with a nominal diameter of 7/32 in and overall length of 3 in. Made of steel with a minimum core and surface hardness of 50 HRC. Used in jigs, fixtures, and tooling for locating or aligning workpieces during machining or assembly
Hardened steel core pin with a nominal diameter of 1/4 in and overall length of 10 in. Core and surface hardness minimum 50 HRC. Diameter tolerance +0.062/-0.000 in, straightness tolerance +0.0005/0.0010 in, chamfer 1/32 in. Used for locating, positioning, or ejecting workpieces in tooling and fixturing applications
PCS
Hardened steel core pin with a nominal diameter of 1/4 in and overall length of 10 in. Core and surface hardness minimum 50 HRC. Diameter tolerance +0.062/-0.000 in, straightness tolerance +0.0005/0.0010 in, chamfer 1/32 in. Used for locating, positioning, or ejecting workpieces in tooling and fixturing applications
Hard core pin with 7/16 in nominal diameter and 6 in overall length. Diameter tolerance +0.062/-0.000 in, length tolerance +0.0005/0.0010 in, with 1/32 in chamfer. Minimum core and surface hardness of 50 HRC. Used in industrial fixturing, jig building, and tooling for precise alignment and wear resistance
PCS
Hard core pin with 7/16 in nominal diameter and 6 in overall length. Diameter tolerance +0.062/-0.000 in, length tolerance +0.0005/0.0010 in, with 1/32 in chamfer. Minimum core and surface hardness of 50 HRC. Used in industrial fixturing, jig building, and tooling for precise alignment and wear resistance

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first