PEMKO Door Sweep: Drip Cap Insert, 72 in Lg
The PEMKO Door Sweep: Drip Cap Insert (MPN 3452DPK72) is a door drip guard with a 72-inch length and 1/2-inch width. It features an aluminum flange and a TPE insert. 3G Electric sources this genuine PEMKO product and…
SKU 3G-OTH-500426
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PEMKO Door Sweep: Drip Cap Insert (MPN 3452DPK72) is a door drip guard with a 72-inch length and 1/2-inch width. It features an aluminum flange and a TPE insert. 3G Electric sources this genuine PEMKO product and supports it across our 14 industrial departments, with specialist expertise in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PEMKO Door Sweep Drip Cap Insert used for?
The PEMKO Door Sweep Drip Cap Insert (MPN 3452DPK72) is a door drip guard that seals the bottom of a door to block water, drafts, and debris. It is commonly installed on exterior doors in commercial and industrial buildings to prevent moisture intrusion and improve energy efficiency.
What are the specifications of the PEMKO 3452DPK72?
The PEMKO 3452DPK72 door sweep drip cap insert measures 72 in long and 1/2 in wide. It features an aluminum flange and a TPE (thermoplastic elastomer) insert. This genuine PEMKO product is designed for durable weather sealing at door bottoms.
Where to buy the PEMKO Door Sweep Drip Cap Insert worldwide?
3G Electric supplies the genuine PEMKO Door Sweep Drip Cap Insert (3452DPK72) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this door drip guard for your industrial or commercial facility.
How to install the PEMKO Door Sweep Drip Cap Insert?
To install the PEMKO door sweep drip cap insert, first measure and cut the 72 in length to fit your door width. Slide the TPE insert into the aluminum flange, then fasten the flange to the bottom of the door using screws. Ensure a tight seal against the threshold for effective weather protection.
PEMKO Produk
3G Electric memasok PEMKO door drip guards. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
