PERMA-BOOT Retrofit Roof Flashing: For Pitched Roof, Baseless Base, For 3:12 to 12:12 Roof Pitch
The PERMA-BOOT Retrofit Roof Flashing is a round-base boot designed for pitched roofs with a 3:12 to 12:12 pitch, accommodating 1-inch pipes. It features an open top opening and a plastic collar, with manufacturer…
SKU 3G-OTH-77152
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PERMA-BOOT Retrofit Roof Flashing is a round-base boot designed for pitched roofs with a 3:12 to 12:12 pitch, accommodating 1-inch pipes. It features an open top opening and a plastic collar, with manufacturer part number 82875. This baseless base flashing is intended for retrofit applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PERMA-BOOT Retrofit Roof Flashing used for?
The PERMA-BOOT Retrofit Roof Flashing seals around 1-inch pipes on pitched roofs with a 3:12 to 12:12 slope. It is a round-base boot with a plastic collar and open top, designed for retrofit applications where existing flashing must be replaced without removing roofing.
What are the specifications of the PERMA-BOOT Retrofit Roof Flashing?
This PERMA-BOOT flashing (MPN 82875) has an open top opening, a plastic collar, and a baseless round base. It fits 1-inch pipes on roofs with a 3:12 to 12:12 pitch. The collar material is plastic, and the boot is intended for retrofit installations on pitched roofs.
Where to buy the PERMA-BOOT Retrofit Roof Flashing worldwide?
3G Electric supplies the PERMA-BOOT Retrofit Roof Flashing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this flashing for your project.
How to install the PERMA-BOOT Retrofit Roof Flashing?
Install the PERMA-BOOT flashing by sliding the plastic collar over the 1-inch pipe and securing the baseless base to the roof deck. Ensure the boot aligns with the roof pitch (3:12 to 12:12). Seal edges with roofing cement per manufacturer guidelines for a watertight fit.
PERMA-BOOT Produk
3G Electric memasok PERMA-BOOT round-base boots. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
