RANCO Mechanical Lube Oil Pressure Control: 8 psi to 60 psi, 120 sec Delay
The RANCO Mechanical Lube Oil Pressure Control (MPN P30-3801) is a mechanical lube oil pressure control designed for use with Copeland compressors and non-corrosive refrigerants. It operates with a pressure range of…
SKU 3G-OTH-67113
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RANCO Mechanical Lube Oil Pressure Control (MPN P30-3801) is a mechanical lube oil pressure control designed for use with Copeland compressors and non-corrosive refrigerants. It operates with a pressure range of 8 psi to 60 psi and a 120-second delay, includes an alarm circuit, and requires a 240V AC input voltage.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RANCO P30-3801 mechanical lube oil pressure control used for?
The RANCO P30-3801 is a mechanical lube oil pressure control used to protect Copeland compressors in refrigeration systems. It monitors oil pressure and includes a 120-second delay and an alarm circuit to prevent compressor damage from low oil pressure.
What are the specifications of the RANCO P30-3801?
The RANCO P30-3801 operates from 8 psi to 60 psi with a 120-second delay. It requires 240V AC input voltage, is designed for non-corrosive refrigerants, and includes an alarm circuit. It is a mechanical lube oil pressure control for Copeland compressors.
Where to buy the RANCO P30-3801 worldwide?
3G Electric supplies the RANCO P30-3801 mechanical lube oil pressure control worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this genuine RANCO part to your facility, wherever it is located.
How to install the RANCO P30-3801 lube oil pressure control?
Install the RANCO P30-3801 by connecting it to the compressor oil pump discharge line and the crankcase. Set the cut-out pressure between 8 psi and 60 psi. Wire the 240V AC alarm circuit per the manufacturer's diagram. Always follow Copeland compressor guidelines.
Digunakan dalam
Aplikasi umum untuk RANCORANCO Produk
3G Electric memasok RANCO mechanical lube oil pressure controls. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








