RAPIDAIR Compression Tee Fitting: 1 in OD 1 in OD 1/2 in OD Fitting Size, Reducer
The RAPIDAIR Compression Tee Fitting (MPN M8016) is a brass reducer fitting for compressed air systems, sized 1 in OD x 1 in OD x 1/2 in OD. As a Reducer, Brass type, it connects and reduces tubing in pneumatic…
SKU 3G-OTH-477635
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RAPIDAIR Compression Tee Fitting (MPN M8016) is a brass reducer fitting for compressed air systems, sized 1 in OD x 1 in OD x 1/2 in OD. As a Reducer, Brass type, it connects and reduces tubing in pneumatic lines. 3G Electric interprets your demand, sources this genuine RAPIDAIR component, and supports your industrial application across 14 departments — with specialist depth in pneumatics and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RAPIDAIR Compression Tee Fitting used for?
The RAPIDAIR Compression Tee Fitting (MPN M8016) is used to connect and reduce tubing in compressed air systems. Its brass construction and reducer design allow it to join a 1 in OD line to a 1/2 in OD branch, making it suitable for pneumatic distribution in industrial plants.
What are the specifications of the RAPIDAIR M8016 fitting?
The RAPIDAIR M8016 is a brass compression tee fitting with a reducer configuration. It has three connection ports: two at 1 in OD and one at 1/2 in OD. The part is designed for compressed air systems and is manufactured by RAPIDAIR under part number M8016.
Where to buy RAPIDAIR M8016 compression tee fitting worldwide?
3G Electric supplies the RAPIDAIR M8016 compression tee fitting worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source genuine RAPIDAIR components and support your pneumatic applications across 14 departments.
How to install a RAPIDAIR compression tee fitting?
To install the RAPIDAIR compression tee fitting, ensure tubing ends are clean and cut square. Slide the compression nut and ferrule onto each tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid over-tightening to prevent brass damage.
Digunakan dalam
Aplikasi umum untuk RAPIDAIRRAPIDAIR Produk
3G Electric memasok RAPIDAIR compressed air system brass compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
