RAPIDAIR Compression Fitting Adapter: 25 mm OD x 25 mm OD Size, Compression x Compression
The RAPIDAIR Compression Fitting Adapter (MPN F2210) is a nylon compression x compression fitting for 25 mm OD x 25 mm OD compressed air system tubing. 3G Electric interprets your demand for this genuine RAPIDAIR…
SKU 3G-OTH-491188
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RAPIDAIR Compression Fitting Adapter (MPN F2210) is a nylon compression x compression fitting for 25 mm OD x 25 mm OD compressed air system tubing. 3G Electric interprets your demand for this genuine RAPIDAIR part, sourcing it across 14 industrial departments—and far more—with specialist depth in pneumatics as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RAPIDAIR F2210 compression fitting used for?
The RAPIDAIR F2210 is a nylon compression x compression adapter used to join two 25 mm OD compressed air system tubes. It is commonly applied in pneumatic distribution networks, factory air lines, and industrial automation systems where reliable, leak-free connections are required.
What are the specifications of the RAPIDAIR F2210?
The RAPIDAIR F2210 is a compression x compression fitting made of nylon. It connects 25 mm OD tubing on both ends. The manufacturer part number is F2210. This adapter is designed for use in compressed air systems and is sourced by 3G Electric across 14 industrial departments.
Where to buy the RAPIDAIR F2210 worldwide?
3G Electric supplies the genuine RAPIDAIR F2210 compression fitting to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to order this nylon compression x compression adapter for 25 mm OD tubing.
How to install the RAPIDAIR F2210 compression fitting?
To install the RAPIDAIR F2210, cut the 25 mm OD tubing square and deburr the end. Push the tube fully into the fitting until it stops. Tighten the compression nut by hand, then use a wrench for an additional quarter turn. Do not overtighten to avoid damaging the nylon body.
Digunakan dalam
Aplikasi umum untuk RAPIDAIRRAPIDAIR Produk
3G Electric memasok RAPIDAIR compressed air system nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
