REESE Contact Interface Universal: Clamp-Over, 6 ft Wire Lg, 2 1/4 in Dia
The REESE Contact Interface Universal: Clamp-Over is a fleet and vehicle maintenance component with a 2 1/4 in diameter, 6 ft wire length, and 6 ft overall length (MPN 119250). 3G Electric interprets customer demand…
SKU 3G-OTH-484645
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The REESE Contact Interface Universal: Clamp-Over is a fleet and vehicle maintenance component with a 2 1/4 in diameter, 6 ft wire length, and 6 ft overall length (MPN 119250). 3G Electric interprets customer demand and delivers this genuine industrial part across 14 departments—including electrical, material handling, and more—with specialist depth in combustion, pumps, and controls as an authorized distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the REESE Contact Interface Universal Clamp-Over used for?
The REESE Contact Interface Universal Clamp-Over is used in fleet and vehicle maintenance to provide a secure electrical connection for trailer wiring. It clamps onto the vehicle's existing wiring harness, enabling quick and reliable hookup of lights and signals without cutting or splicing wires.
What are the specifications of the REESE 119250 Contact Interface?
The REESE 119250 Contact Interface has a 2 1/4 in diameter clamp-over design, a 6 ft wire length, and a 6 ft overall length. It is a universal component for fleet and vehicle maintenance, manufactured by REESE under MPN 119250.
Where to buy the REESE Contact Interface Universal in worldwide?
3G Electric supplies the REESE Contact Interface Universal (MPN 119250) to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive this genuine fleet maintenance component wherever your operations are located.
How to install the REESE Clamp-Over Contact Interface?
To install the REESE Clamp-Over Contact Interface, first locate the vehicle's trailer wiring harness. Open the clamp, position it over the harness, and close it securely to establish contact. Route the 6 ft wire to the trailer connector, ensuring no sharp bends or pinches. Test all lights and signals after installation.
REESE Produk
3G Electric memasok REESE fleet and vehicle maintenance. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
