RHINO Color-Coded Shrink Tubing: 1 in I.D. Before Shrinking, 0.5 in I.D. After Shrinking
The RHINO Color-Coded Shrink Tubing (SKU 907J45, MPN RCT-1.00-Y) is a standard heat shrink tubing product in Yellow. It has a 1 in inner diameter before shrinking and a 0.5 in inner diameter after shrinking, with a 4…
SKU 3G-OTH-54530
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RHINO Color-Coded Shrink Tubing (SKU 907J45, MPN RCT-1.00-Y) is a standard heat shrink tubing product in Yellow. It has a 1 in inner diameter before shrinking and a 0.5 in inner diameter after shrinking, with a 4 ft length.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is RHINO Color-Coded Shrink Tubing used for?
RHINO Color-Coded Shrink Tubing is used for insulating, protecting, and color-coding electrical wires and cables in industrial, automotive, and panel-building applications. The yellow color aids quick identification of circuits or phases. It shrinks to half its original diameter when heated, providing a tight, durable cover.
What are the specifications of RHINO Color-Coded Shrink Tubing?
The RHINO Color-Coded Shrink Tubing (MPN RCT-1.00-Y) has a 1 in inner diameter before shrinking and a 0.5 in inner diameter after shrinking. It is 4 ft long and comes in Yellow. This standard heat shrink tubing is manufactured by RHINO and is suitable for general-purpose wire insulation and identification.
Where to buy RHINO Color-Coded Shrink Tubing in worldwide?
You can source RHINO Color-Coded Shrink Tubing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact 3G Electric for availability and lead time on this item.
How to install RHINO Color-Coded Shrink Tubing?
To install, slide the tubing over the wire or connection before shrinking. Apply heat evenly using a heat gun or torch at approximately 250 °F (121 °C) until the tubing shrinks tightly around the substrate. Allow it to cool before handling. Ensure the tubing is fully seated before heating for best results.
Digunakan dalam
Aplikasi umum untuk RHINORHINO Produk
3G Electric memasok RHINO standard heat shrink tubing. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















