Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
RIDGID 36620 Receding Geared Threader - Receding Geared Threaders
RIDGIDReceding Geared Threaders

RIDGID 36620 Receding Geared Threader

RIDGID Receding Geared Threader model 141 adalah alat threading pipa berukuran 2 1/2 in hingga 4 in yang dirancang untuk kebutuhan industri perpipaan. Produk ini dilengkapi dengan Die Set dan memiliki Die Head Sizes…

SKU 3G-OTH-308040

Merek
RIDGID
Item
36620 Receding Geared Threader
Part Number
36620
Kategori
Receding Geared Threaders
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Spesifikasi Teknis

RIDGID
Manufacturer Part Number
36620
Type
For 2 1/2 in to 4 in Pipe
UNSPSC
27112805
Features
Jaw Clutch Prevents Jamming
Tool Series
141
Catalog Page
824
Die Head Sizes
2-1/2 in to 4 in
Max. Pipe Dia.
4 in Max. Pipe Dia. The largest pipe size that the tool can thread.
Min. Pipe Dia.
2-1/2 in Min. Pipe Dia. The smallest pipe size that the tool can thread.
No. of Die Heads
0
Country of Origin
South Korea (subject to change)
Threading Equipment Included
Die Set

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

RIDGID Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

RIDGID Receding Geared Threader model 141 adalah alat threading pipa berukuran 2 1/2 in hingga 4 in yang dirancang untuk kebutuhan industri perpipaan. Produk ini dilengkapi dengan Die Set dan memiliki Die Head Sizes 2 1/2 in hingga 4 in, dengan Manufacturer Part Number 36620. Cocok untuk aplikasi threading pipa di sektor peralatan industri seperti ketel uap dan pembakar industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa RIDGID Receding Geared Threader 141 digunakan?

RIDGID Receding Geared Threader 141 digunakan untuk membuat ulir pada pipa berukuran 2 1/2 in hingga 4 in. Alat ini ideal untuk aplikasi threading pipa di industri perpipaan, termasuk untuk peralatan pembakaran dan ketel uap.

Apa spesifikasi RIDGID Receding Geared Threader 141?

Spesifikasi RIDGID Receding Geared Threader 141 meliputi tipe untuk pipa 2 1/2 in hingga 4 in, Die Head Sizes 2 1/2 in hingga 4 in, dan Manufacturer Part Number 36620. Produk ini dilengkapi dengan Die Set dari RIDGID.

Di mana beli RIDGID Receding Geared Threader 141 di Indonesia?

Anda dapat membeli RIDGID Receding Geared Threader 141 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu.

Bagaimana cara memilih RIDGID Receding Geared Threader 141 yang tepat?

Pilih RIDGID Receding Geared Threader 141 jika Anda perlu threading pipa dengan ukuran 2 1/2 in hingga 4 in. Pastikan Die Head Sizes sesuai dengan diameter pipa Anda. Produk ini menggunakan Die Set dari RIDGID untuk hasil threading yang presisi.

Digunakan dalam

Aplikasi umum untuk RIDGID
Pipe fabrication shops — RIDGID 1224 Series threading machine with die head 26152 for NPT threading on 2-1/2 in to 4 in pipe.
Drain maintenance services — RIDGID SeeSnake CS65XR inspection camera for 100 ft drain line visual inspection.
Plumbing repair — RIDGID K9-12 cordless drain cleaner for clearing blockages in 1-1/4 in to 2 in pipes.
Industrial piping support — RIDGID V-Head pipe stand 22168 for holding pipe during threading or cutting operations.
Tube bending for HVAC — RIDGID 38048 lever bender for 1/2 in stainless steel tubing in gas or water lines.
Threading die replacement — RIDGID 38105 dies for rethreading pipe nipples on-site using RIDGID threading equipment.
Not sure this is the right part? Photo-identify it→

RIDGID Produk

3G Electric memasok RIDGID receding geared threaders. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Set of five replacement die heads for manual ratchet pipe threaders. Includes two dies for threading NPT pipe sizes from 1 in to 2 in. Designed for right-hand threading on steel pipe in plumbing and piping applications
RIDGID
Set of five replacement die heads for manual ratchet pipe threaders. Includes two dies for threading NPT pipe sizes from 1 in to 2 in. Designed for right-hand threading on steel pipe in plumbing and piping applications
Replacement loop component for the RIDGID 161 Receding Threader. Guides and supports cutting dies during pipe threading operations. Used in industrial plumbing and mechanical applications for maintaining accurate threads on steel pipe
RIDGID
Replacement loop component for the RIDGID 161 Receding Threader. Guides and supports cutting dies during pipe threading operations. Used in industrial plumbing and mechanical applications for maintaining accurate threads on steel pipe
This die head is designed for use with handheld pipe threaders to cut NPT threads on 3/8-inch pipe. Constructed from high-speed steel, it features right-hand thread direction. Suitable for threading operations in plumbing and piping applications
RIDGID
This die head is designed for use with handheld pipe threaders to cut NPT threads on 3/8-inch pipe. Constructed from high-speed steel, it features right-hand thread direction. Suitable for threading operations in plumbing and piping applications
This die head is designed for use with handheld pipe threaders to cut NPT threads on 1/4-inch pipe. It features right-hand threading and is constructed from alloy steel. Suitable for manual threading applications in plumbing and piping systems
RIDGID
This die head is designed for use with handheld pipe threaders to cut NPT threads on 1/4-inch pipe. It features right-hand threading and is constructed from alloy steel. Suitable for manual threading applications in plumbing and piping systems
This RIDGID machine die head is designed for cutting right-hand NPT threads on pipe from 1/8 in to 2 in. It is compatible with RIDGID threading machines in the 1215, 300, and 535 series. Used in plumbing, piping, and industrial maintenance for creating threaded connections
RIDGID
This RIDGID machine die head is designed for cutting right-hand NPT threads on pipe from 1/8 in to 2 in. It is compatible with RIDGID threading machines in the 1215, 300, and 535 series. Used in plumbing, piping, and industrial maintenance for creating threaded connections
Self-opening die head for threading right-hand NPT threads on pipe sizes from 2 1/2 in to 4 in. Designed for use with 1224 Series threading machines. Suitable for industrial piping and mechanical contracting applications
RIDGID
Self-opening die head for threading right-hand NPT threads on pipe sizes from 2 1/2 in to 4 in. Designed for use with 1224 Series threading machines. Suitable for industrial piping and mechanical contracting applications

Lainnya dari RIDGID

Lihat semua RIDGID suku cadang →