ROCKWOOD Corner Guard: Brass, Gold, For 90° Angle, 3 in Leg Wd, 4 ft Overall Ht
The ROCKWOOD Corner Guard is a brass screw-in corner guard designed for 90° angles, featuring a gold finish. It has a thickness of 0.05 inches, a leg width of 3 inches, and an overall height of 4 feet (MPN 295.3 3" x…
SKU 3G-OTH-536083
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ROCKWOOD Corner Guard is a brass screw-in corner guard designed for 90° angles, featuring a gold finish. It has a thickness of 0.05 inches, a leg width of 3 inches, and an overall height of 4 feet (MPN 295.3 3" x 3" x 48).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ROCKWOOD Corner Guard used for?
The ROCKWOOD Corner Guard protects exposed 90° corners in industrial and commercial settings from impact damage. Its brass construction and gold finish suit decorative or high-traffic areas where durability and appearance matter. 3G Electric supplies this guard across 14 industrial departments, including material handling and facility maintenance.
What are the specifications of the ROCKWOOD Corner Guard?
This ROCKWOOD Corner Guard (MPN 295.3 3" x 3" x 48) is brass with a gold finish, designed for 90° angles. It has a thickness of 0.05 in, a leg width of 3 in, and an overall height of 4 ft. It is a screw-in type for secure mounting. 3G Electric sources this guard globally.
Where to buy the ROCKWOOD Corner Guard worldwide?
3G Electric supplies the ROCKWOOD Corner Guard worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we interpret your demand and deliver genuine equipment and parts across 14 departments. Contact us for availability and delivery to your location.
How to install the ROCKWOOD Corner Guard?
Install the ROCKWOOD Corner Guard by positioning it over a clean 90° corner, then driving screws through the pre-drilled holes into the wall or frame. Use appropriate anchors for the substrate. Ensure the guard is plumb before final tightening. 3G Electric provides sourcing support for this and related hardware.
Digunakan dalam
Aplikasi umum untuk ROCKWOODROCKWOOD Produk
3G Electric memasok ROCKWOOD brass screw-in corner guards. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
