RPM ENGINEERING Grommet: Style 1 Grommet, SBR, 0.63 in Inside Dia
The RPM ENGINEERING Style 1 Grommet (MPN SBRMS35489-18) is a Mil-Spec grommet made from SBR with a hardness of 60A. It features a 0.63 in inside diameter and a 1.5 in outside diameter, is abrasion resistant, and…
SKU 3G-OTH-508232
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RPM ENGINEERING Style 1 Grommet (MPN SBRMS35489-18) is a Mil-Spec grommet made from SBR with a hardness of 60A. It features a 0.63 in inside diameter and a 1.5 in outside diameter, is abrasion resistant, and meets ASTM D2000 M6AA607 standards.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RPM ENGINEERING Style 1 Grommet used for?
The RPM ENGINEERING Style 1 Grommet (MPN SBRMS35489-18) is used to protect cables, wires, and hoses passing through metal panels or enclosures. Its SBR construction and abrasion resistance make it suitable for industrial, military-spec, and heavy-equipment applications where durability and vibration dampening are required.
What are the specifications of the RPM ENGINEERING Style 1 Grommet?
This Style 1 Grommet has a 0.63 in inside diameter and a 1.5 in outside diameter. It is made from SBR with a hardness of 60A, is abrasion resistant, and meets ASTM D2000 M6AA607 standards. The manufacturer part number is SBRMS35489-18.
Where to buy RPM ENGINEERING Style 1 Grommet worldwide?
3G Electric supplies the RPM ENGINEERING Style 1 Grommet (MPN SBRMS35489-18) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Mil-Spec grommet.
How to install an RPM ENGINEERING Style 1 Grommet?
To install, ensure the panel hole is clean and deburred. Lubricate the grommet lightly with silicone or soapy water, then press it into the hole from the outside. The grommet should seat flush against the panel. For tight fits, use a blunt tool to work the lip into place without cutting the rubber.
RPM ENGINEERING Produk
3G Electric memasok RPM ENGINEERING style 1 grommets - mil spec.. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
