RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 2 5/8 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel shaft collar with a 2 5/8 in bore diameter (MPN SP-42-F). It is designed for secure shaft mounting and positioning in industrial…
SKU 3G-OTH-160271
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel shaft collar with a 2 5/8 in bore diameter (MPN SP-42-F). It is designed for secure shaft mounting and positioning in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING 2-piece shaft collar used for?
A RULAND MANUFACTURING 2-piece shaft collar is used to position, secure, or limit components on a shaft without damaging the shaft surface. Common applications include industrial machinery, conveyors, and automation equipment where precise axial positioning is required.
What are the specifications of the RULAND MANUFACTURING SP-42-F shaft collar?
The RULAND MANUFACTURING SP-42-F is a 2-piece, round, clamp-on shaft collar made from carbon steel. It has a bore diameter of 2 5/8 inches and uses inch dimensions. The clamp-on design allows for easy installation and repositioning without marring the shaft.
Where to buy RULAND MANUFACTURING shaft collars worldwide?
You can source RULAND MANUFACTURING shaft collars worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the SP-42-F or other models.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install a RULAND MANUFACTURING 2-piece clamp-on shaft collar, place both halves around the shaft at the desired position, then tighten the screws evenly using a hex key. Ensure the bore is clean and the shaft is free of debris. Avoid over-tightening to prevent shaft damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
