RULAND MANUFACTURING Shaft Collar: 1-Piece, Inch, Round, Clamp-On, 3 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 1-piece, clamp-on stainless steel shaft collar with a 3-inch bore diameter and 7/8-inch collar width. This inch-sized, round collar is designed for secure shaft mounting and…
SKU 3G-OTH-137418
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 1-piece, clamp-on stainless steel shaft collar with a 3-inch bore diameter and 7/8-inch collar width. This inch-sized, round collar is designed for secure shaft mounting and is identified by manufacturer part number CL-48-SS.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING shaft collar used for?
A RULAND MANUFACTURING shaft collar, like the CL-48-SS, is used to position and secure components on a shaft. It acts as a mechanical stop, locating bearing, or spacer in industrial machinery, conveyors, and automation equipment. The clamp-on design provides a firm, adjustable grip without marring the shaft.
What are the specifications of the RULAND MANUFACTURING CL-48-SS shaft collar?
The RULAND MANUFACTURING CL-48-SS is a 1-piece, clamp-on stainless steel shaft collar. It has a 3-inch bore diameter and a 7/8-inch collar width. It is an inch-sized, round collar designed for secure shaft mounting. The manufacturer part number is CL-48-SS.
Where to buy a RULAND MANUFACTURING shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING CL-48-SS shaft collar worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this stainless steel clamp-on collar.
How to install a RULAND MANUFACTURING clamp-on shaft collar?
To install a RULAND MANUFACTURING clamp-on shaft collar, slide it onto the shaft to the desired position. Tighten the clamping screw(s) evenly with a hex key until the collar is secure. Avoid over-tightening to prevent damage. Always verify alignment and re-check tightness after initial operation.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
