RULAND MANUFACTURING Shaft Collar: 1-Piece, Metric, Round, Clamp-On, 13 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 1-piece, clamp-on steel shaft collar with a 13 mm bore diameter and 11 mm collar width. This metric round collar is designed for secure shaft mounting and is identified by…
SKU 3G-OTH-148156
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 1-piece, clamp-on steel shaft collar with a 13 mm bore diameter and 11 mm collar width. This metric round collar is designed for secure shaft mounting and is identified by manufacturer part number MCL-13-F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MCL-13-F shaft collar used for?
The RULAND MANUFACTURING MCL-13-F is a 1-piece, clamp-on steel shaft collar used to secure components on a 13 mm shaft. It is commonly applied in power transmission, conveyor systems, and industrial machinery where precise axial positioning and reliable clamping are required.
What are the specifications of the RULAND MANUFACTURING MCL-13-F shaft collar?
The RULAND MANUFACTURING MCL-13-F is a metric, round, clamp-on shaft collar with a 13 mm bore diameter and 11 mm collar width. It is made of steel and identified by manufacturer part number MCL-13-F. This 1-piece design provides secure mounting without marring the shaft.
Where to buy the RULAND MANUFACTURING MCL-13-F shaft collar worldwide?
You can source the RULAND MANUFACTURING MCL-13-F shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive genuine RULAND MANUFACTURING components for your application.
How to install a RULAND MANUFACTURING clamp-on shaft collar?
To install the RULAND MANUFACTURING MCL-13-F, slide the collar onto a clean 13 mm shaft at the desired position. Tighten the clamp screw evenly using a hex key until the collar is firmly secured. Avoid overtightening to prevent shaft damage. Always verify axial positioning before final tightening.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
